A task involves positioning two metal parts with a rubber gasket sandwiched between them, inserting two bolts into predrilled holes, threading a nut onto each bolt, and tightening each bolt with a pneumatic wrench. In a preliminary study, the manager observed one of his workers perform this task five times. The observations were made in an air-conditioned, well-lighted training facility, at ground level, with all tools and equipment clean and readily available.
$$\begin{array} { | l | c | c | c | c | c | }
\hline \text { Observation: } & 1 & 2 & 3 & 4 & 5 \
\hline \text { Task time (seconds): } & 50 & 54 & 60 & 145 & 56 \
\hline
\end{array}$$
a. What is the average observed time for this task?
b. What is the normal time for this task if the employee worked at a 10% slower pace than is typical for adequately trained workers?
c. What is standard time for this task if allowances are 8% constant and 6% variable?

Question

A task involves positioning two metal parts with a rubber gasket sandwiched between them, inserting two bolts into predrilled holes, threading a nut onto each bolt, and tightening each bolt with a pneumatic wrench. In a preliminary study, the manager observed one of his workers perform this task five times. The observations were made in an air-conditioned, well-lighted training facility, at ground level, with all tools and equipment clean and readily available.
 $$\begin{array} { | l | c | c | c | c | c | } 
\hline \text { Observation: } & 1 & 2 & 3 & 4 & 5 \
\hline \text { Task time (seconds): } & 50 & 54 & 60 & 145 & 56 \
\hline
\end{array}$$ 
a. What is the average observed time for this task?
b. What is the normal time for this task if the employee worked at a 10% slower pace than is typical for adequately trained workers?
c. What is standard time for this task if allowances are 8% constant and 6% variable?

Quizplus · Accepted Answer

The Answer of A task involves positioning two metal parts with a rubber gasket sandwiched between them, inserting two bolts into predrilled holes, threading a nut onto each bolt, and tightening each bolt with a pneumatic wrench. In a preliminary study, the manager observed one of his workers perform this task five times. The observations were made in an air-conditioned, well-lighted training facility, at ground level, with all tools and equipment clean and readily available.
 $$\begin{array} { | l | c | c | c | c | c | } 
\hline \text { Observation: } & 1 & 2 & 3 & 4 & 5 \
\hline \text { Task time (seconds): } & 50 & 54 & 60 & 145 & 56 \
\hline
\end{array}$$ 
a. What is the average observed time for this task?
b. What is the normal time for this task if the employee worked at a 10% slower pace than is typical for adequately trained workers?
c. What is standard time for this task if allowances are 8% constant and 6% variable?

A Task Involves Positioning Two Metal Parts with a Rubber