A supplier is producing a machined part for the transmission of your vehicle.The upper specification limit is 0.125 cm and the lower specification limit is 0.085.The process standard deviation for the process that makes this part is 0.008 and the process average is 0.105.What conclusion can be drawn from these process capability data?
A) The process is centered and capable.
B) The process is not centered and capable.
C) The process is centered and not capable.
D) The process is not centered and not capable.
Correct Answer:
Verified
Q2: Define quality at the source.
Q40: Common cause variation
A)Cannot be explained except in
Q42: Statistical calculations will show that if p
Q43: Which of the following suggests a process
Q44: The center line (p-bar) for a p-chart
Q46: Ritz-Carlton Hotel Company uses which one of
Q47: Historically, the average proportion of defective bars
Q48: Indications in a control chart of an
Q50: Which is not related to a discrete
Q99: Define and give an example of the
Unlock this Answer For Free Now!
View this answer and more for free by performing one of the following actions
Scan the QR code to install the App and get 2 free unlocks
Unlock quizzes for free by uploading documents