Question 1

What conditions must be met for a conventional Runtime Resource to be able to receive an instruction and start processing? (Select three.)
A) The device where the Runtime Resource is installed must be logged in
B) An Interactive Client must be logged in prior to starting the Runtime Resource
C) The Runtime Resource must be started
D) The network connectivity must be configured to allow the Runtime Resource to receive connections from all relevant Interactive Clients and Application Servers
E) All Application Server must be configured to process schedules
F) The SSLCert switch must be configured on the Application Server

Accepted Answer

D,E,F

Question 2

What is the Blue Prism Interactive Client used for? (Select three.)
A) It is responsible for automatically starting and stopping schedules
B) In non-production environments, it is where automated processes are designed and verified
C) In production environments, it is where automated processes are designed
D) In production environments, it is used to monitor and control the platform
E) In production environments, it is used to configure the platform and define scheduled
F) It is responsible for providing database connectivity to all connected devices

Accepted Answer

A,E,F

Question 3

Which of the following statements is correct? (Select two.)
A) Each Blue Prism environment (e.g. Dev/UAT/Prod) will have a single database
B) Each Blue Prism environment (e.g. Dev/UAT/Prod) will potentially have many databases
C) Each Blue Prism environment (e.g. Dev/UAT/Prod) can have many Application Servers but they will all connect to the same database
D) Each Blue Prism environment (e.g. Dev/UAT/Prod) can have may Application Servers but they will all connect to the same database
E) Each Blue Prism environment (e.g. Dev/UAT/Prod) can have one Application Server but can connect to many databases

Accepted Answer

A,E

Question 4

When settings should be used for the Connection Mode and Server port when configuring a connection from the Runtime Resource to the Application Server? (Select two.)
A) The Connection Mode on the Runtime Resource should be set to apply the appropriate encryption settings based on the processes that will be run on the device
B) The Connection Mode on the Runtime Resource should be set to On to allow the device to be controlled remotely. Set if to be Off to allow local control and connections only
C) The Connection Mode on the Runtime Resource must match the Connection Mode configured on the Blue Prism Server
D) The Server Mode on the Runtime Resource must match the Server Port configured on the Blue Prism Server
E) The Server Port only needs to be set if a port other than 8181 will be used

Accepted Answer

The answer of When settings should be used for the...

Question 5

Which of the following are common reasons why a Blue Prism Interactive Client is not be able to connect to an Application Server? (Select three.)
A) If the Application Server service is not started
B) It firewalls prevent the Application Server from receiving traffic on the appropriate port
C) If the Application Server is configured to use Transport Encryption but the certificate cannot be validated
D) Invalid user credentials
E) A user is logged into Blue Prism on the Application Server

Accepted Answer

The answer of Which of the following are common reasons...

Question 6

How can we ensure that all Runtime Resources in the environment are configured to establish a secure connection with the Blue Prism server? (Select one.)
A) Use the /SSLCert switch in the Runtime Resource start up parameters  
B) Under System -> Settings, enable the "Require secure resource connections" setting
C) Within the configuration for the Blue Prism Server select a Connection Mode that does not contain the text "insecure"
D) All of the above

Accepted Answer

The answer of How can we ensure that all Runtime...

Question 7

Which of the following statements are true in reference to the permissions required for the Blue Prism Application Server service log on user? (Select four.)
A) When a Blue Prism Server is configured with a SQL Server database connection that uses SQL Native Authentication, the service log on user needs SQL dbowner privileges
B) When the Blue Prism connection used by the server is configured to use SQL Native Authentication, the service log on user does not need any SQL privileges  
C) When a Blue Prism Server is configured with a SQL Server database connection that uses SQL Windows Authentication, the service log on user needs the minimum permissions on the appropriate Blue Prism SQL Server database as identified in the documentation
D) When using Single Sign on for the Blue Prism platform, the service log on user needs permission to query Active Directory Security Group membership
E) When using Single Sign on for the Blue Prism platform, the service log on user needs to be a Domain Administrator
F) When using Blue Prism native authentication for the Blue Prism platform, the service log on user needs to be a Domain administrator
G) When configured to use a connection mode that uses Transport encryption, the service log on user needs read-access to the associated certificate's private key

Accepted Answer

The answer of Which of the following statements are true...

Question 8

What port does a Runtime Resource use to receive communication? (Select one.)
A) It receives instructional information on port 8181 by default but this is configurable using the /port switch
B) It receives instructional information on port 8199 by default but this is configurable using the /inbound switch
C) It receives instructional information using the selected WCF connection method exclusively on port 443
D) It receives instructional information using the selected WCF connection method exclusively on port 8080

Accepted Answer

The Runtime Resource receives communication on port 8181 by default, but this can be changed using the /port switch.

Question 9

How can a Login Agent Runtime Resource be instructed to encrypt new inbound connections? (Select one.)
A) It can't - the Login Agent does not accept inbound connections
B) The configuration file for Login Agent can be manually updated to instruct it to specify the SSLCert switch when it starts
C) Login Agent automatically enforces encrypted communication
D) The connection to the Blue Prism Server should be set to use a WCF mode that provides Encryption

Accepted Answer

The configuration file for Login Agent can be manually updated to specify the SSLCert switch, enabling encryption for new inbound connections.

Question 10

What BPServer.exe profile name is the default Blue Prism Server service configured to use? (Select one.)
A) It will use the profile which is configured with the "Is Default" flag
B) It will use the first profile when ordered alphabetically
C) It will use the last profile when ordered alphabetically
D) It will use the profile named "Default"

Accepted Answer

The answer of What BPServer.exe profile name is the default...

Question 11

Which of the following MUST be considered when deploying Login Agent? (Select four.)
A) A number of security settings need to be appropriately configured/disabled on each device where it runs (e.g. ctrl +alt+del prior to login must be disabled)
B) The Login Agent Runtime Resource is configured to use on of the Blue Prism connections configured on the local device
C) Editing the configuration of the Login Agent Runtime Resource can be done within the appropriate configuration file
D) Login Agent can only be used on devices that are members of an Active Directory Domain Network Infrastructure  
E) Once a device has been logged in, a congenital Runtime Resource needs to be configured to start automatically (which will automatically shut-down the Login Agent Runtime Resource)

Accepted Answer

The answer of Which of the following MUST be considered...

Question 12

Is it possible to configure an Interactive Client to connect to multiple environments? (Select one.)
A) Yes. Before a user signs in they can select which environment they wish to connect to
B) Yes. Before a user signs in they can select all the environments which they will be able to control simultaneously
C) No - an Interactive Client can only be configured to connect to a single environment

Accepted Answer

An Interactive Client can be configured to connect to multiple environments, and the user can select which environment to connect to before signing in.

Question 13

What permissions are recommended for applying upgrade scripts to the Blue Prism Database? (Select one.)
A) Not Applicable - It is recommended that the Blue Prism client is used to apply the database upgrade script and this is automatically entitled to make all changes
B) dbowner
C) datareader, datawriter
D) datareader, datawriter, all roles named with a prefix of bp_dba
E) All of the above

Accepted Answer

The dbowner permission is recommended for applying upgrade scripts to the Blue Prism Database to ensure all necessary changes can be made.

Question 14

What format of machine name does an Interactive Client or Application Server use to establish a direct connection with a Runtime Resource? (Select one.)
A) It always uses the short machine name (e.g. robot001)
B) it always uses the fully qualified domain name (FQDN) (e.g.robot001.mydomain.local)
C) it depends on the system wide setting which indicates whether short name or FQDN will be used
D) It uses the format of the name specified on the certificate that is associated with the Runtime Resource

Accepted Answer

It depends on the system wide setting which indicates whether short name or FQDN will be used

Question 15

Which of the following features are only available when using a Blue Prism Application Server? (Select three.)
A) Release manager
B) Credential manager where the key encryption key is stored in the database
C) Credential manager where the key encryption key is stored in a file
D) Single sign-on authentication for Blue Prism
E) Schedules
F) Database connection marshalling/proxy

Accepted Answer

The answer of Which of the following features are only...

Question 16

Which of the following statements are true? (Select two.)
A) All work queue items are automatically encrypted using the most cryptographically strong scheme that has been configured within the environment
B) Only Work Queue Items associated with Work Queues that have been associated with an Encryption Scheme will be encrypted
C) Work Queue Items will be encrypted using the algorithm and key on the Encryption Scheme associated with the Work Queue
D) Work Queue items will be encrypted using the algorithm on the Encryption Scheme associated with the Work
E) Queue and a key that is randomly generated when the Application Server restarts
F) Work Queue items cannot be encrypted

Accepted Answer

Work Queue Items are encrypted only if they are associated with a Work Queue that has an Encryption Scheme, and they use the algorithm and key specified in that scheme.

Question 17

What does the /SSLCert switch provide when starting a Runtime Resource? (Select two.)
A) It ensures that the Runtime Resource establishes a secure outbound connection with the Application Server or Database Server  
B) It ensures that inbound connections on the listening port (default 8181) will be encrypted
C) When hosting Web Services on the Runtime Resources, the inbound connections will need to use HTTPS
D) Only users who have used a domain account to log onto the device can launch Blue Prism

Accepted Answer

The answer of What does the /SSLCert switch provide when...

Question 18

What are benefits of Login Agent? (Select four.)
A) Provides a Login Agent Runtime Resource which can receive simple instructions prior to being in a logged in state  
B) Allows a Login Agent Runtime Resource to immediately automatically login using saved credentials as part of a device reboot
C) Removes the requirement for locally stored device credentials
D) Provides the ability to manually instruct a Login Agent Runtime Resource to login
E) Provides the ability to schedule when a Login Agent Runtime Resource will be logged in
F) Allows processes which interact with locally installed applications to be executed without the device being logged in

Accepted Answer

The answer of What are benefits of Login Agent? (Select...

Question 19

Which of the following are steps that would normally be take on the local device when configuring a Runtime Resource? (Select four.)
A) Configure a connection to a Blue Prism Application Server
B) Configure the database maintenance procedures
C) Configure the Runtime Resource to start automatically when the device is logged on with appropriate parameters
D) Optionally configure the Runtime Resource start-up procedure with the thumbprint of a local certificate
E) Optionally install and configure Login Agent
F) Ensure the AutomateC.exe is accessible to the logged in user
G) Disable all domain policies

Accepted Answer

The answer of Which of the following are steps that...

Question 20

Where is the information reported when a Blue Prism Server service fails to start? (Select one.)
A) In Control Panel under Resource Manager
B) Under System >Server Management
C) In the event logs on the local device. These can be accessed using Event Viewer
D) It is not reported but the troubleshooting guide provides useful tips to diagnose the issue

Accepted Answer

When a Blue Prism Server service fails to start, the information is reported in the event logs on the local device, which can be accessed using the Event Viewer.

Exam 2: Installing and Configuring a Blue Prism (Version 6.0) Environment

What conditions must be met for a conventional Runtime Resource to be able to receive an instruction and start processing? (Select three.)

What is the Blue Prism Interactive Client used for? (Select three.)

Which of the following statements is correct? (Select two.)

When settings should be used for the Connection Mode and Server port when configuring a connection from the Runtime Resource to the Application Server? (Select two.)

Which of the following are common reasons why a Blue Prism Interactive Client is not be able to connect to an Application Server? (Select three.)

How can we ensure that all Runtime Resources in the environment are configured to establish a secure connection with the Blue Prism server? (Select one.)

Which of the following statements are true in reference to the permissions required for the Blue Prism Application Server service log on user? (Select four.)

What port does a Runtime Resource use to receive communication? (Select one.)

How can a Login Agent Runtime Resource be instructed to encrypt new inbound connections? (Select one.)

What BPServer.exe profile name is the default Blue Prism Server service configured to use? (Select one.)

Which of the following MUST be considered when deploying Login Agent? (Select four.)

Is it possible to configure an Interactive Client to connect to multiple environments? (Select one.)

What permissions are recommended for applying upgrade scripts to the Blue Prism Database? (Select one.)

What format of machine name does an Interactive Client or Application Server use to establish a direct connection with a Runtime Resource? (Select one.)

Which of the following features are only available when using a Blue Prism Application Server? (Select three.)

Which of the following statements are true? (Select two.)

What does the /SSLCert switch provide when starting a Runtime Resource? (Select two.)

What are benefits of Login Agent? (Select four.)

Which of the following are steps that would normally be take on the local device when configuring a Runtime Resource? (Select four.)

Where is the information reported when a Blue Prism Server service fails to start? (Select one.)