Question 1

Which of the following ventilators is pneumatically powered?

Accepted Answer

The Bio-Med MVP-10 is a fluidic ventilator and uses only gases for its operation.The LTV 1000,Lifecare PLV-102,and Intermed Bear 33 are electrically controlled and powered ventilators.

Question 2

The type of compressors that are used by hospitals to supply wall compressed air has which of the following?

Accepted Answer

Hospitals use large,piston-type,water-cooled compressors to supply wall gas outlets.

Question 3

The internal circuit of a ventilator allows the gas to go directly from its power source into the patient.This is known as which of the following?

Accepted Answer

There are two types of internal circuits,the single- and the double-circuit.The single-circuit allows the gas to flow from its power input source to the patient.The double-circuit utilizes a primary power source to generate a gas flow that compresses a mechanism such as a bellows.The gas within the bellows will then flow to the patient.Open and closed loop refer to the absence or presence,respectively,of a feedback loop system.

Question 4

In the image,what does "B" represent?

Accepted Answer

The external exhalation valve is represented by the letter "C" in the figure."B" is pointing to the expiratory line.The main inspiratory line is represented by the letter "A." The expiratory valve line is represented by "D."

Question 5

Modern intensive care units' (ICU)ventilators regulate gas flow to the patient by using which of the following?

Accepted Answer

Proportional solenoid valves control flow by opening and closing either completely or in small increments.These valves,which are driven by various motor-based mechanisms,have a rapid response time and great flexibility in flow control.The other answers are all volume displacement devices.

Question 6

The respiratory therapist enters modes and parameters into the ventilator with which of the following?

Accepted Answer

The user interface or control panel contains certain knobs,dials,or keypads where the ventilator operator sets or enters certain information to establish how the pressure and pattern of gas flow is delivered by the machine.Inside the ventilator is the control logic or control system which interprets the operator settings and produces and regulates the desired output.The input power is the ventilator's power source that provides the energy to enable the ventilator to perform the work of ventilating the patient.The drive mechanism is a mechanical device that produces gas flow to the patient.

Question 7

A patient being transferred from a hospital to a skilled nursing facility requires mechanical ventilation with a fractional inspired oxygen (F_IO₂)of 0.21.The skilled nursing facility has no piped in gases.Which of the following ventilators will be able to function in the skilled nursing facility without any extra equipment?

Accepted Answer

The type of ventilator that will be appropriate for this situation is one that is electrically controlled and powered with a built-in air compressor.The LTV 1000 fits this description.The Servoⁱ requires both a high-pressure gas source as well as electrical power.The Bird Mark 7 is a pneumatic ventilator and will not be able to function in this situation.The Bio-Med MVP-10 is also a pneumatic ventilator that won't function in this situation.

Question 8

The function of the exhalation valve is to do which of the following?

Accepted Answer

During inspiration,gas fills the balloon and closes a hole in the expiratory valve.Closing of the hole makes the patient circuit a sealed system.During expiration,the balloon deflates,the hole opens,and gas from the patient is exhaled into the room through the hole.

Question 9

The power transmission and conversion system of a ventilator is defined as which of the following?

Accepted Answer

The power transmission and conversion system changes the energy from the power source into mechanical energy.The linear drive piston is a mechanical device that produces gas flow to the patient.The drive mechanism is an electrical motor that is connected by a special gearing mechanism.It is the control system that interprets the operator settings and produces or regulates the desired output.

Question 10

A ventilator for which the primary power source generates a gas flow that compresses another mechanism and causes the gas from inside the mechanism to be delivered to the patient is known as which of the following?

Accepted Answer

In a double circuit ventilator,the primary power source generates a gas flow that compresses a mechanism such as a bellows or "bag-in-a-chamber." The gas in the bellows or bag then flows to the patient.In a single-circuit ventilator,the primary power source travels directly to the patient.The closed and open loop refer to whether or not the ventilator has a feedback loop system.

Question 11

The volume displacement device that creates a sinusoidal flow waveform is which of the following?

Accepted Answer

The rotary drive piston creates a flow pattern that is slow at the beginning of inspiration,achieves highest speed at mid-inspiration,and tapers off at end-inspiration,creating a sinusoidal waveform (sine waveform).

Quiz 2: How Ventilators Work