Deck 4: Service Information, Specifications, and Measurements 

Question 1

____ are similar to wiring diagrams but show how various fluids or air move through a hydraulic (oil-filled) or pneumatic (air-filled) circuit.

A) Diagnosis charts
B) Flow diagrams
C) Parts interchange guides
D) Refinishing guides

Answer 1

B

Question 2

____ give logical steps for finding the source of problems.

A) Repair guides
B) Diagnosis charts
C) Wiring diagrams
D) Flow diagrams

Answer 2

B

Question 3

____ are small pictures that represent a location, part, procedures, safety warning, measurement point, or other aspect of repair.

A) Service symbols
B) Flow diagrams
C) Paint codes
D) Refinishing guides

Answer 3

A

Question 4

Micrometers measure small clearances inside parts.

Question 5

Measurements are number values that help control repair processes in collision repair.

Question 6

____ are handy for changing from one measuring system to another or from one value to another.

A) Parts Interchange guides
B) Conversion charts
C) Collision estimating guides
D) Specifications

Question 7

The ____ is also an alphanumeric code that states what type and color of paint was used during vehicle manufacturing.

A) tram gauge
B) mil gauge
C) paint thickness
D) paint code

Question 8

The ____ gives information about the finish (paint) and the trim or moldings used on a specific vehicle.

A) body ID number
B) mil gauge
C) conversion chart
D) paint code

Question 9

____ results when you read a rule or scale from an angle instead of looking at it straight down.

A) Diagnosis error
B) Refinishing error
C) Parallax error
D) Wiring error

Question 10

Special service tools (SSTs) are tools designed to be used for specific repair applications.

Question 11

The tool MOST-Likely used to measure part movement and out-of-round in thousandths of an inch is:

A) the spring scale
B) the dial indicator
C) the feeler gauge
D) the micrometer

Question 12

A(n) ____ is a special body dimension measuring tool.

A) outside caliper
B) VIN plate
C) MSDS
D) tram gauge

Question 13

Trim illustrations show how molding and trim pieces attach to the vehicle.

Question 14

Part location illustrations will often have large arrows that pinpoint part locations, and they sometimes show an enlarged second view of the part detail.

Question 15

Some automobile companies publish yearly service manuals that describe the construction and repair of their vehicles.

Question 16

VIN abbreviations are a short series of letters that represent technical terms or words.

Question 17

SDS service guides give procedures, safety warnings, component locations, and other facts for working on active restraint systems.

Question 18

While having a discussion, Technician A says that excessive pressure can be dangerous or damage parts.Technician B says that low air pressure may keep a tool from working properly.Who is correct?

A) A only
B) B only
C) Both A and B
D) Neither A nor B

Question 19

Panel welding illustrations give the factory recommended weld count, weld type, and weld locations for replacing structural panels.

Question 20

Mil gauges are sometimes used to measure mechanical parts when high precision is important.

Question 21

____ are used by paint suppliers and technicians to weigh the various ingredients when mixing paint materials.

A) Pressure gauges
B) Mixing scales
C) Dial thermometers
D) Flow meters

Question 22

What is the difference between a mercury thermometer and a dial thermometer?

Question 23

The ___________________________________ is used to find out how and when the vehicle was manufactured.

Question 24

While having a discussion, Technician A says that paint thickness is measured in cm.Technician B says that it is measured in liters.Who is correct?

A) A only
B) B only
C) Both A and B
D) Neither A nor B

Question 25

Which of the following is LEAST-Likely a type of mil gauge?

A) pencil
B) gauge
C) digital
D) steel

Question 26

What is the I-CAR RTS Website?

Question 27

_________________________ are drawings that show the location of electrical components.

Question 28

______________________________ give(s) instructions, safety warnings, and technical illustrations for specific makes and models of vehicles.

Question 29

____ basically divide a circle into 360 or more parts called degrees.

A) Angle measurements
B) Flow measurements
C) Inside measurement
D) Outside measurements

Question 30

What information is usually included in a vehicle dimension manual or software?

Question 31

Which of the following statements is LEAST-Likely true?

A) Standard mixing scales simply weigh each paint ingredient as it is poured into the mixing cup on the scale.
B) Proportional mixing means that for a specific volume of paint or other material, a specific amount of another material must be added.
C) A graduated pail has lines denoting volume for pouring and measuring liquid materials.
D) Computerized intelligent scales allow automated paint mixing.

Question 32

The term MOST-Likely used to describe an instrument used to measure body temperature when painting is:

A) the pressure gauge
B) the caliper
C) the flow meter
D) the surface thermometer

Question 33

______________________________ provides easy access to a user-customized database of recycled parts and suppliers in North America and Canada.

Question 34

What information is typical contained in an airbag service guide?

Question 35

All of the following are measuring tools EXCEPT:

A) dial indicator
B) the micrometer
C) the pressure gauge
D) the scuff plate

Question 36

______________________________ is designed to help enhance the collision repair facility's productivity, profitability, and customer service by coordinating all aspects of collision repair.

Question 37

What tool is used to measure the thickness or fluidity of mixed materials?

A) viscosity cup
B) graduated pail
C) mixing scale
D) mil gauge