Question 1

____ are similar to wiring diagrams but show how various fluids or air move through a hydraulic (oil-filled) or pneumatic (air-filled) circuit.
A) Diagnosis charts
B) Flow diagrams
C) Parts interchange guides
D) Refinishing guides

Accepted Answer

Flow diagrams are used to illustrate how fluids or air move through hydraulic or pneumatic circuits, making them similar to wiring diagrams but for fluid or air flow.

Question 2

____ give logical steps for finding the source of problems.
A) Repair guides
B) Diagnosis charts
C) Wiring diagrams
D) Flow diagrams

Accepted Answer

Diagnosis charts provide a logical step-by-step process for identifying the source of problems.

Question 3

____ are small pictures that represent a location, part, procedures, safety warning, measurement point, or other aspect of repair.
A) Service symbols
B) Flow diagrams
C) Paint codes
D) Refinishing guides

Accepted Answer

Service symbols are small pictures used to represent various aspects of repair, including locations, parts, procedures, safety warnings, and measurement points.

Question 4

Micrometers measure small clearances inside parts.

Accepted Answer

The answer of Micrometers measure small clearances inside parts....

Question 5

Measurements are number values that help control repair processes in collision repair.

Accepted Answer

Measurements in collision repair are crucial for assessing the extent of damage, ensuring repairs restore the vehicle to its original specifications, and guaranteeing safety and functionality.

Question 6

____ are handy for changing from one measuring system to another or from one value to another.
A) Parts Interchange guides
B) Conversion charts
C) Collision estimating guides
D) Specifications

Accepted Answer

Conversion charts are specifically designed to help convert units from one measuring system to another (e.g., from metric to imperial) or to convert between different units within the same system (e.g., inches to feet).

Question 7

The ____ is also an alphanumeric code that states what type and color of paint was used during vehicle manufacturing.
A) tram gauge
B) mil gauge
C) paint thickness
D) paint code

Accepted Answer

The paint code is an alphanumeric code that specifies the type and color of paint used during vehicle manufacturing, allowing for accurate color matching for repairs or repainting.

Question 8

The ____ gives information about the finish (paint) and the trim or moldings used on a specific vehicle.
A) body ID number
B) mil gauge
C) conversion chart
D) paint code

Accepted Answer

The answer of The ____ gives information about the finish...

Question 9

____ results when you read a rule or scale from an angle instead of looking at it straight down.
A) Diagnosis error
B) Refinishing error
C) Parallax error
D) Wiring error

Accepted Answer

Parallax error occurs when an observer does not look straight down at a scale or a measuring device, but instead views it from an angle, leading to inaccurate readings.

Question 10

Special service tools (SSTs) are tools designed to be used for specific repair applications.

Accepted Answer

Special Service Tools (SSTs) are designed for specific repair or maintenance tasks on vehicles or machinery, ensuring the job is done efficiently and correctly.

Question 11

The tool MOST-Likely used to measure part movement and out-of-round in thousandths of an inch is:
A) the spring scale
B) the dial indicator
C) the feeler gauge
D) the micrometer

Accepted Answer

The dial indicator is the tool most commonly used to measure part movement and out-of-round conditions to a high degree of precision, often in thousandths of an inch. It is specifically designed for these types of measurements, providing clear, precise readings for small increments.

Question 12

A(n) ____ is a special body dimension measuring tool.
A) outside caliper
B) VIN plate
C) MSDS
D) tram gauge

Accepted Answer

A tram gauge is a tool used to measure body dimensions, especially in automotive repair to check the alignment and dimensions of a vehicle's body.

Question 13

Trim illustrations show how molding and trim pieces attach to the vehicle.

Accepted Answer

Trim illustrations are diagrams or drawings that show the specific locations and methods for attaching molding, trim pieces, and other decorative or functional elements to a vehicle's exterior or interior.

Question 14

Part location illustrations will often have large arrows that pinpoint part locations, and they sometimes show an enlarged second view of the part detail.

Accepted Answer

Part location illustrations often use large arrows to clearly indicate where parts are located within a system or assembly, and they may include an enlarged view or inset to show detailed features of the part for clearer understanding.

Question 15

Some automobile companies publish yearly service manuals that describe the construction and repair of their vehicles.

Accepted Answer

Automobile companies often publish yearly service manuals to provide detailed information on the construction, maintenance, and repair of their vehicles, assisting technicians and owners.

Question 16

VIN abbreviations are a short series of letters that represent technical terms or words.

Accepted Answer

VIN stands for Vehicle Identification Number, which is a unique code used to identify individual motor vehicles.

Question 17

SDS service guides give procedures, safety warnings, component locations, and other facts for working on active restraint systems.

Accepted Answer

The answer of SDS service guides give procedures, safety warnings,...

Question 18

While having a discussion, Technician A says that excessive pressure can be dangerous or damage parts.Technician B says that low air pressure may keep a tool from working properly.Who is correct?
A) A only
B) B only
C) Both A and B
D) Neither A nor B

Accepted Answer

Both technicians are correct. Excessive pressure can indeed be dangerous and potentially damage parts, while low air pressure may prevent a tool from functioning as intended.

Question 19

Panel welding illustrations give the factory recommended weld count, weld type, and weld locations for replacing structural panels.

Accepted Answer

Panel welding illustrations are provided by vehicle manufacturers to ensure that repairs meet factory specifications, including the recommended number of welds, types of welds, and precise locations for welding when replacing structural panels.

Question 20

Mil gauges are sometimes used to measure mechanical parts when high precision is important.

Accepted Answer

The answer of Mil gauges are sometimes used to measure...

Quiz 4: Service Information, Specifications, and Measurements

____ are similar to wiring diagrams but show how various fluids or air move through a hydraulic (oil-filled) or pneumatic (air-filled) circuit.

____ give logical steps for finding the source of problems.

____ are small pictures that represent a location, part, procedures, safety warning, measurement point, or other aspect of repair.

Micrometers measure small clearances inside parts.

Measurements are number values that help control repair processes in collision repair.

____ are handy for changing from one measuring system to another or from one value to another.

The ____ is also an alphanumeric code that states what type and color of paint was used during vehicle manufacturing.

The ____ gives information about the finish (paint) and the trim or moldings used on a specific vehicle.

____ results when you read a rule or scale from an angle instead of looking at it straight down.