Question 1

A leading packaging consultant has indicated that improved packaging efficiency can lead to a typical client achieving a ___________ percent reduction in packaging,transportation,and warehousing costs.
A)5
B)7
C)10
D)14

Accepted Answer

A 10 percent reduction in packaging, transportation, and warehousing costs can be achieved through improved packaging efficiency, as indicated by a leading packaging consultant.

Question 2

What has been described as the "last frontier" of logistics savings opportunities?
A)information technology
B)transportation consolidation
C)packaging inefficiencies
D)inventory management

Accepted Answer

Packaging inefficiencies have been described as the "last frontier" of logistics savings opportunities because optimizing packaging can lead to significant reductions in shipping costs, material costs, and environmental impact, areas that are often overlooked after other logistics optimizations have been implemented.

Question 3

The Globally Harmonized System of Classification and Labeling of Chemicals GHS)was developed by the ___________.
A)International Chamber of Commerce
B)World Trade Organization
C)World Bank
D)United Nations

Accepted Answer

The Globally Harmonized System of Classification and Labeling of Chemicals (GHS) was developed by the United Nations to standardize and harmonize the classification and labeling of chemicals worldwide.

Question 4

Dimensional weight ___________.
A)considers a shipment's density to determine a shipment's billable weight
B)only applies to big and bulky items
C)is the same as a shipment's actual weight
D)tends to decrease shipping costs

Accepted Answer

Dimensional weight considers both the size and weight of a package to determine shipping costs, reflecting the density of a shipment. It does not solely apply to big and bulky items, is not the same as actual weight, and typically increases rather than decreases shipping costs for less dense packages.

Question 5

As a general rule,labeling requirements and enforcement tends to be more stringent in ___________ countries than in ___________ countries.
A)larger;smaller
B)older;younger
C)economically developed;economically developing
D)smaller;larger

Accepted Answer

Labeling requirements and enforcement are generally more stringent in economically developed countries than in economically developing countries, due to more comprehensive regulations and greater resources for enforcement.

Question 6

Which of the following is not a characteristic of plastic packaging?
A)There is a lack of versatility.
B)It takes a long time to biodegrade.
C)Plastic packaging is cheaper than paper packaging.
D)Plastic litter can kill marine animals.

Accepted Answer

Plastic packaging is known for its versatility, as it can be manufactured in various shapes, sizes, and for different purposes, making it a popular choice for packaging a wide range of products. The other options (B, C, D) are accurate characteristics of plastic packaging: it is slow to biodegrade, often cheaper than alternatives like paper, and can harm marine life when it becomes litter.

Question 7

A unit load involves ___________.
A)a convoy of railcars carrying the same product
B)loading an entire vehicle with shipments from three or fewer shippers
C)the usage of a pallet rack system of storage
D)consolidation of several units into larger units to improve efficiency in handling and to reduce shipping costs

Accepted Answer

The answer of A unit load involves ___________.
A)a convoy of...

Question 8

Three countries in the world,including the United States and Myanmar,do not use the metric system.What is the third country that doesn't use the metric system?
A)Algeria
B)Liberia
C)Argentina
D)Cambodia

Accepted Answer

Liberia, along with the United States and Myanmar, does not use the metric system as the primary system of measurement.

Question 9

Properly designing a protective packaging system requires three important kinds of information.Which of the following is not one of the three kinds of information?
A)severity of the distribution environment
B)performance characteristics of the various cushion materials
C)fragility of the product to be protected
D)value of the product to be protected

Accepted Answer

The three important kinds of information needed for designing a protective packaging system include the severity of the distribution environment, performance characteristics of the various cushion materials, and the fragility of the product to be protected. The value of the product, while important for other considerations, is not directly related to the design of the protective packaging in terms of physical protection requirements.

Question 10

Products exist in ___________ forms,and each form has specific packaging requirements.
A)two
B)three
C)four
D)five

Accepted Answer

Products exist in three forms: solid, liquid, and gas. Each form has specific packaging requirements to ensure the product's integrity, safety, and quality during storage and transportation. Solid products may require different packaging solutions than liquids or gases, which might need containers that can handle pressure or prevent leaks.

Question 11

Which of the following is not a key piece of classification and labeling information provided by the Globally Harmonized System of Classification and Labeling of Chemicals GHS)?
A)signal word e.g. ,"danger")
B)picture of the chemical or hazardous material
C)symbol
D)hazard statement e.g. ,"severe projection hazard")

Accepted Answer

The Globally Harmonized System of Classification and Labeling of Chemicals (GHS) does not include pictures of the chemical or hazardous material as a key piece of classification and labeling information. Instead, it uses signal words, symbols (pictograms), and hazard statements to convey hazards.

Question 12

A "box-maker's certificate" ___________.
A)indicates a box's environmental friendliness
B)is given in recognition of superior box-making ability
C)assures that boxes are free from any visible defects
D)assures railroads and motor carriers that boxes are sufficiently sturdy to meet their handling requirements

Accepted Answer

A box-maker's certificate primarily assures railroads and motor carriers that boxes meet specific standards for sturdiness and durability, ensuring they can withstand the rigors of transportation and handling.

Question 13

Product density refers to a product's ___________.
A)volume
B)weight
C)weight per volume
D)fragility

Accepted Answer

Product density is defined as the product's weight per unit volume, which is a measure of how much mass is contained in a given volume of the product.

Question 14

___________ systems consider the reverse flow of products,their reuse,and the marketing and distribution of recovered products.
A)Eco-friendly
B)Open-loop
C)Closed-loop
D)Dynamic

Accepted Answer

Closed-loop systems specifically focus on the reverse flow of products, their reuse, and the marketing and distribution of recovered products, aiming to minimize waste and maximize resource efficiency.

Question 15

___________ refers to materials used for the containment,protection,handling,delivery,and presentation of goods.
A)Materials management
B)Materials handling
C)Procurement
D)Packaging

Accepted Answer

Packaging refers to materials used for the containment, protection, handling, delivery, and presentation of goods, ensuring they are delivered in a safe, secure, and appealing manner to the end consumer.

Question 16

Each of the following is a shipping hazard that a package may be exposed to except:
A)retraction.
B)vibration.
C)compression.
D)rough handling.

Accepted Answer

Retraction is not a recognized shipping hazard for packages. Vibration, compression, and rough handling are all common hazards that packages may be exposed to during shipping.

Question 17

The building blocks concept is associated with which logistics function?
A)warehousing
B)packaging
C)materials handling
D)inventory management

Accepted Answer

The answer of The building blocks concept is associated with...

Question 18

Which of the following is not an ethylene-sensitive product?
A)lettuce
B)watermelon
C)broccoli
D)tomatoes

Accepted Answer

The answer of Which of the following is not an...

Question 19

The text indicates that there has been a marked increase in the usage of reusable plastic containers by ___________.
A)apparel companies
B)book publishers
C)snack food companies
D)produce shippers

Accepted Answer

The text suggests that produce shippers have significantly increased their use of reusable plastic containers, likely due to the need for durable and sustainable packaging solutions in the transportation of perishable goods.

Question 20

Packaging serves ___________ general functions.
A)five
B)four
C)three
D)two

Accepted Answer

The answer of Packaging serves ___________ general functions.
A)five
B)four
C)three
D)two ...

Quiz 11: Packaging and Materials Handling

A leading packaging consultant has indicated that improved packaging efficiency can lead to a typical client achieving a ___________ percent reduction in packaging,transportation,and warehousing costs.

What has been described as the "last frontier" of logistics savings opportunities?

The Globally Harmonized System of Classification and Labeling of Chemicals GHS) was developed by the ___________.

Dimensional weight ___________.

As a general rule,labeling requirements and enforcement tends to be more stringent in _ countries than in _ countries.

Which of the following is not a characteristic of plastic packaging?

A unit load involves ___________.

Three countries in the world,including the United States and Myanmar,do not use the metric system.What is the third country that doesn't use the metric system?

Properly designing a protective packaging system requires three important kinds of information.Which of the following is not one of the three kinds of information?

Products exist in ___________ forms,and each form has specific packaging requirements.

Which of the following is not a key piece of classification and labeling information provided by the Globally Harmonized System of Classification and Labeling of Chemicals GHS) ?

A "box-maker's certificate" ___________.

Product density refers to a product's ___________.

___________ systems consider the reverse flow of products,their reuse,and the marketing and distribution of recovered products.

___________ refers to materials used for the containment,protection,handling,delivery,and presentation of goods.

Each of the following is a shipping hazard that a package may be exposed to except:

The building blocks concept is associated with which logistics function?

Which of the following is not an ethylene-sensitive product?

The text indicates that there has been a marked increase in the usage of reusable plastic containers by ___________.

Packaging serves ___________ general functions.