If a master cylinder with a 1 inch bore is replaced with a cylinder with a three-quarter inch bore, the pressure in the brake lines will be higher when the same amount of brake pedal pressure is applied to each cylinder.
Correct Answer:
Verified
Q2: Master cylinders are generally not overhauled in
Q2: A brake line must be single-flared to
Q4: Most manufacturers recommend changing the brake fluid
Q5: A brake fluid lamp will illuminate on
Q7: If the front hydraulic circuit fails on
Q9: Vehicles built since 1976 have a center
Q14: All master cylinders are made of cast
Q15: When the brakes are applied while the
Q20: Fully metallic linings require very high pedal
Q34: All manufacturers recommend a specific sequence to
Unlock this Answer For Free Now!
View this answer and more for free by performing one of the following actions
Scan the QR code to install the App and get 2 free unlocks
Unlock quizzes for free by uploading documents