Refer to Figure 6. Assume VC = 0.07 V and VB = 0.7 V. The fault may be that A)VCC has dropped to 8 V B)RC is open C)V_CCis open D)R_Eis open

Question

Quizplus · Accepted Answer

Given that VC is very low (0.07 V) and VB is at a typical forward-biased base-emitter voltage (0.7 V), the most likely fault is an open circuit in the collector resistor (RC). This would prevent current flow through the collector, resulting in a low collector voltage. The other options do not directly explain these specific voltage conditions.