Question 1

A switch operating in full ___________ mode can send and receive data at the same time.

Accepted Answer

The answer of A switch operating in full ___________ mode...

Question 2

Match each item with a statement below.
a.switch
b.default route
c.half-duplex mode
d.router
e.bandwidth sharing
f.repeater
g.CTS
h.network interface card
i.uplink port
j.network bandwidth
-indicates that the wireless computer can transmit data

Accepted Answer

The answer of Match each item with a statement below.
a.switch
b.default...

Question 3

The ______________ address is composed of two 24-bit numbers.

Accepted Answer

The answer of The ______________ address is composed of two...

Question 4

Match each item with a statement below.
a.switch
b.default route
c.half-duplex mode
d.router
e.bandwidth sharing
f.repeater
g.CTS
h.network interface card
i.uplink port
j.network bandwidth
-amount of data that can be transferred on a network in a specified interval

Accepted Answer

The answer of Match each item with a statement below.
a.switch
b.default...

Question 5

A __________ frame is a message that is intended to be processed by all devices on the LAN.

Accepted Answer

The answer of A __________ frame is a message that...

Question 6

Match each item with a statement below.
a.switch
b.default route
c.half-duplex mode
d.router
e.bandwidth sharing
f.repeater
g.CTS
h.network interface card
i.uplink port
j.network bandwidth
-designated port on a hub or switch used to connect to another hub or switch

Accepted Answer

The answer of Match each item with a statement below.
a.switch
b.default...

Question 7

Match each item with a statement below.
a.switch
b.default route
c.half-duplex mode
d.router
e.bandwidth sharing
f.repeater
g.CTS
h.network interface card
i.uplink port
j.network bandwidth
-how devices connected to a hub use network bandwidth

Accepted Answer

The answer of Match each item with a statement below.
a.switch
b.default...

Question 8

Match each item with a statement below.
a.switch
b.default route
c.half-duplex mode
d.router
e.bandwidth sharing
f.repeater
g.CTS
h.network interface card
i.uplink port
j.network bandwidth
-device that only regenerates incoming signals

Accepted Answer

The answer of Match each item with a statement below.
a.switch
b.default...

Question 9

Which of the following are true about routers? (Choose all that apply.)

Accepted Answer

Routers break up a network into functional groups by creating separate broadcast domains. They work with IP addresses to route packets between networks. By connecting multiple networks, routers allow computers on different networks to communicate. Routers do not forward broadcasts out all connected ports, which is a characteristic of switches.

Question 10

Match each item with a statement below.
a.switch
b.default route
c.half-duplex mode
d.router
e.bandwidth sharing
f.repeater
g.CTS
h.network interface card
i.uplink port
j.network bandwidth
-device that uses MAC addresses to determine the destination of frame

Accepted Answer

The answer of Match each item with a statement below.
a.switch
b.default...

Question 11

Match each item with a statement below.
a.switch
b.default route
c.half-duplex mode
d.router
e.bandwidth sharing
f.repeater
g.CTS
h.network interface card
i.uplink port
j.network bandwidth
-communication in which a device can send and receive signals but not at the same time

Accepted Answer

The answer of Match each item with a statement below.
a.switch
b.default...

Question 12

The network ____________ is a measurement of the amount of data that can pass through a network in a certain period of time.

Accepted Answer

The answer of The network ____________ is a measurement of...

Question 13

Match each item with a statement below.
a.switch
b.default route
c.half-duplex mode
d.router
e.bandwidth sharing
f.repeater
g.CTS
h.network interface card
i.uplink port
j.network bandwidth
-device that connects a computer with the network medium

Accepted Answer

The answer of Match each item with a statement below.
a.switch
b.default...

Question 14

What command would you issue from the command prompt to test whether your computer has connectivity to the network?

Accepted Answer

The ping command is used to test connectivity between two devices on a network. By issuing the ping command followed by an IP address, the computer will send a message to that IP address and wait for a response. If a response is received, it means there is connectivity between the two devices.

Question 15

Which of the following are features of a router? (Choose all that apply)

Accepted Answer

Routers connect different LANs to one another and work with packets to route data between networks.

Question 16

In some wireless network configurations, a computer must send a special message to the AP before it can transmit data. What is this message called?

Accepted Answer

The special message that a computer sends to an AP before transmitting data is called a Request to Send (RTS) message. This message is used in a process called RTS/CTS (Ready to Send/Clear to Send) where the computer sends an RTS message to the AP, which responds with a Clear to Send (CTS) message, indicating that it is ready to receive data. This helps to prevent collisions and ensure that data is transmitted reliably. ARP (Address Resolution Protocol) is used to map a network address (such as an IP address) to a physical address (such as a MAC address). CTS (Clear to Send) is the message sent by the AP in response to an RTS message. DNS (Domain Name System) is used to translate human-readable domain names (such as www.google.com) into IP addresses.

Question 17

Match each item with a statement below.
a.switch
b.default route
c.half-duplex mode
d.router
e.bandwidth sharing
f.repeater
g.CTS
h.network interface card
i.uplink port
j.network bandwidth
-routing table entry that tells a router where to send a packet with a destination network address that can't be found in the routing table

Accepted Answer

The answer of Match each item with a statement below.
a.switch
b.default...

Question 18

In a computer's IP address settings, the default _____________ is the address of the router to which a computer sends all packets that are intended for networks outside of its own.

Accepted Answer

The answer of In a computer's IP address settings, the...

Question 19

Which of the following is true about a NIC?

Accepted Answer

For outgoing messages, it converts frame data into bit signals.

Question 20

Match each item with a statement below.
a.switch
b.default route
c.half-duplex mode
d.router
e.bandwidth sharing
f.repeater
g.CTS
h.network interface card
i.uplink port
j.network bandwidth
-device that connects LANs

Accepted Answer

The answer of Match each item with a statement below.
a.switch
b.default...

Quiz 2: Network Hardware Essentials

A switch operating in full ___________ mode can send and receive data at the same time.

Match each item with a statement below. a.switch b.default route c.half-duplex mode d.router e.bandwidth sharing f.repeater g.CTS h.network interface card i.uplink port j.network bandwidth -indicates that the wireless computer can transmit data

The ______________ address is composed of two 24-bit numbers.

Match each item with a statement below. a.switch b.default route c.half-duplex mode d.router e.bandwidth sharing f.repeater g.CTS h.network interface card i.uplink port j.network bandwidth -amount of data that can be transferred on a network in a specified interval

A __________ frame is a message that is intended to be processed by all devices on the LAN.

Match each item with a statement below. a.switch b.default route c.half-duplex mode d.router e.bandwidth sharing f.repeater g.CTS h.network interface card i.uplink port j.network bandwidth -designated port on a hub or switch used to connect to another hub or switch

Match each item with a statement below. a.switch b.default route c.half-duplex mode d.router e.bandwidth sharing f.repeater g.CTS h.network interface card i.uplink port j.network bandwidth -how devices connected to a hub use network bandwidth

Match each item with a statement below. a.switch b.default route c.half-duplex mode d.router e.bandwidth sharing f.repeater g.CTS h.network interface card i.uplink port j.network bandwidth -device that only regenerates incoming signals

Which of the following are true about routers? (Choose all that apply.)

Match each item with a statement below. a.switch b.default route c.half-duplex mode d.router e.bandwidth sharing f.repeater g.CTS h.network interface card i.uplink port j.network bandwidth -device that uses MAC addresses to determine the destination of frame

Match each item with a statement below. a.switch b.default route c.half-duplex mode d.router e.bandwidth sharing f.repeater g.CTS h.network interface card i.uplink port j.network bandwidth -communication in which a device can send and receive signals but not at the same time

The network ____________ is a measurement of the amount of data that can pass through a network in a certain period of time.

Match each item with a statement below. a.switch b.default route c.half-duplex mode d.router e.bandwidth sharing f.repeater g.CTS h.network interface card i.uplink port j.network bandwidth -device that connects a computer with the network medium

What command would you issue from the command prompt to test whether your computer has connectivity to the network?

Which of the following are features of a router? (Choose all that apply)

In some wireless network configurations, a computer must send a special message to the AP before it can transmit data. What is this message called?

In a computer's IP address settings, the default _____________ is the address of the router to which a computer sends all packets that are intended for networks outside of its own.

Which of the following is true about a NIC?

Match each item with a statement below. a.switch b.default route c.half-duplex mode d.router e.bandwidth sharing f.repeater g.CTS h.network interface card i.uplink port j.network bandwidth -device that connects LANs