Question 1

If communication was lost between your computer and the Ethernet communications module after the driver has been successfully configured, an X will display on top of the module's icon,

Accepted Answer

This is true. If communication is lost between the computer and Ethernet communications module after the driver has been successfully configured, an X will display on top of the module's icon. If communication is lost between the computer and Ethernet communications module after the driver has been successfully configured, an X will display on top of the module's icon indicating that the connection has been lost.

Question 2

The Ethernet driver for the CompactLogix Ethernet controller must be configured prior to configuring the personal computer with which communication is desired.

Accepted Answer

The Ethernet driver for the CompactLogix Ethernet controller does not need to be configured prior to configuring the personal computer. Instead, the personal computer must be configured first with the appropriate network settings, and then the CompactLogix Ethernet controller can be configured to match those settings.

Question 3

In the Configure Drivers window, the driver that can only be used to configure a driver for the newer modular Ethernet/IP communications modules for the modular ControlLogix chassis and CompactLogix with Ethernet/IP. is the ____________________ driver.

Accepted Answer

Ethernet/IP

Question 4

Manually configuring a driver using the Ethernet devices driver can be used to display only the desired Ethernet/IP devices in RSWho.

Accepted Answer

Manually configuring a driver using the Ethernet devices driver allows the user to select only the desired Ethernet/IP devices to be displayed in RSWho. Manually configuring a driver using the Ethernet devices driver can indeed display only the desired Ethernet/IP devices in RSWho.

Question 5

In the event of a failed attempt to configure a driver for an Ethernet module, what is a simple error that may have occurred?

Accepted Answer

The answer of In the event of a failed attempt...

Question 6

Suppose a yellow question mark and text stating unrecognized device are displayed in the RSWho window. Briefly describe the problem and how it can likely be resolved.

Accepted Answer

The answer of Suppose a yellow question mark and text...

Question 7

One feature of the newer Ethernet/IP driver is that RSLinx browses the local subnet, automatically finds devices with compatible IP addresses, and then finishes configuring the driver for you.

Accepted Answer

The statement is true. This feature of the newer Ethernet/IP driver allows for easier configuration and setup by automatically detecting compatible devices on the local network. The newer Ethernet/IP driver does feature automatic browsing of the local subnet to find compatible devices and complete driver configuration.

Question 8

After a driver has been configured, open the ____________________ window to verify communication has been established with the target device.

Accepted Answer

The answer of After a driver has been configured, open...

Question 9

When configuring a Ethernet/IP driver for a Bulletin 1769 CompactLogix controller using RSLinx, select an Ethernet crossover cable to connect the module and the personal computer.

Accepted Answer

An Ethernet crossover cable is used to connect two devices directly without using a switch or hub. In this case, the Ethernet/IP driver module and the personal computer are connected directly, so an Ethernet crossover cable is required.

Question 10

In the Configure Drivers window, the word "running" listed twice for a configured driver verifies communication with the target device.

Accepted Answer

The word "running" listed twice for a configured driver in the Configure Drivers window indicates that the driver is loaded and operational, but it does not directly verify communication with the target device. Communication verification requires additional steps or indicators.

Question 11

When configuring a driver for a CompactLogix Ethernet module, suppose the personal computer IP address is not available as a selection as an Ethernet interface. What are two checks that can be performed?

Accepted Answer

The answer of When configuring a driver for a CompactLogix...

Question 12

The older ____________________ driver can be used to configure most Ethernet modules; however, it is typically used for the 1756-ENET module.

Accepted Answer

The answer of The older ____________________ driver can be used...

Question 13

An RSLinx driver can be deleted at any time and reconfigured to resolve problems with the driver.

Accepted Answer

The answer of An RSLinx driver can be deleted at...

Question 14

If desired, the default driver name provided by RSLinx during configuration can be changed in the Add New RSLinx Classic Driver window.

Accepted Answer

This statement is true. The user has the option to change the default driver name provided by RSLinx during configuration in the Add New RSLinx Classic Driver window. The statement is true, the default driver name can be changed in the Add New RSLinx Classic Driver window if desired.

Question 15

What steps can be taken if the word "running" is not listed twice for a configured Ethernet driver in the Configure Drivers window?

Accepted Answer

The answer of What steps can be taken if the...

Quiz 28: Configuring a Compact Logix 1769-L23e, 1769-L32e, or 1769-L35e Ethernet-Ip Driver Using Rslinx