Question 1

Color is described as having three dimensions: ____________________, value, and chroma

Accepted Answer

hue

Question 2

Technician A says that factory color codes are found on the driver's door of vehicles. Technician B says that CRI stands for Color Rendering Index. Who is correct?
A) A only
B) B only
C) Both A and B
D) Neither A nor B

Accepted Answer

B

Question 3

Technician A says that color fatigue can occur after staring at a color for only 2 seconds. Technician B says that a side tone angle means a vehicle's color is evaluated at a 45⁰ to 60⁰ angle. Who is correct? A) A only B) B only C) Both A and B D) Neither A nor B

Accepted Answer

Color fatigue typically occurs after prolonged exposure, not just 2 seconds. A side tone angle refers to evaluating a vehicle's color at an angle, typically between 45° to 60°.

Question 4

A ____________________ panel is a panel that is used to match a multi-stage finish. It is generally larger than a sprayout panel and should have a hiding sticker applied.

Accepted Answer

The answer of A ____________________ panel is a panel that...

Question 5

Technician A says that value describes how intense a color is. Technician B says that Albert H. Munsell developed a 3-dimensional color tree used to identify and describe color. Who is correct?
A) A only
B) B only
C) Both A and B
D) Neither A nor B

Accepted Answer

Albert H. Munsell developed a 3-dimensional color tree to identify and describe color, which includes hue, value, and chroma. Value refers to the lightness or darkness of a color, not its intensity.

Question 6

Depending on the light source and whether it contains a full color spectrum of wavelengths may cause the paint to look different in different types of light, or to have ____________________.

Accepted Answer

The answer of Depending on the light source and whether...

Question 7

Technician A says that reflection means light bounces off of a surface and a color is viewed. Technician B says that a color variance on a vehicle can occur because a model of a car could be painted at different factories. Who is correct?
A) A only
B) B only
C) Both A and B
D) Neither A nor B

Accepted Answer

Both statements by Technician A and Technician B are correct. Reflection is the process by which light bounces off surfaces, allowing colors to be perceived. Color variance in vehicles can indeed occur due to differences in painting processes across different factories.

Question 8

Mica is a semi-transparent crystalline material that absorbs and both reflects and ____________________ light in a prismatic fashion.

Accepted Answer

The answer of Mica is a semi-transparent crystalline material that...

Question 9

The color wheel used for automotive tinting uses four divisions of color: red, yellow, blue, and ____________________.

Accepted Answer

The answer of The color wheel used for automotive tinting...

Question 10

Technician A says that color deficiency means a person sees no color at all. Technician B says that metamerism should be judged by viewing it at a side tone angle. Who is correct?
A) A only
B) B only
C) Both A and B
D) Neither A nor B

Accepted Answer

Color deficiency usually means a person has difficulty distinguishing between certain colors, not that they see no color at all. Metamerism is the phenomenon where colors look different under different lighting conditions, and it should be judged under multiple lighting conditions, not specifically at a side tone angle.

Question 11

Technician A says that color deficiency affects women more than men. Technician B says that flop is a condition in which a color containing metallic and/or mica looks different at different angles. Who is correct?
A) A only
B) B only
C) Both A and B
D) Neither A nor B

Accepted Answer

Color deficiency affects men more than women. Flop is indeed a condition where a color containing metallic and/or mica appears different at different angles.

Question 12

When plotting a color, it should be evaluated in the order of value, hue, and chroma.

Accepted Answer

This statement is true. Value (lightness or darkness) should be evaluated first, followed by hue (the actual color), and then chroma (saturation or intensity of the color). This is important for achieving accurate color representation and consistency in color design.

Question 13

A sprayout or color effect panel is a test panel used to check a multi-stage color.

Accepted Answer

The answer of A sprayout or color effect panel is...

Question 14

Technician A says that hue is the dimension of color that describes its color. Technician B says that CRI is a measurement of color corrected light. Who is correct?
A) A only
B) B only
C) Both A and B
D) Neither A nor B

Accepted Answer

Hue is indeed the dimension of color that describes its color, while CRI (Color Rendering Index) measures the ability of a light source to reveal the colors of objects faithfully in comparison with a natural light source, not color corrected light.

Question 15

Technician A says that chroma is sometimes call intensity. Technician B says that chroma is the dimension of color that describes it lightness. Who is correct?
A) A only
B) B only
C) Both A and B
D) Neither A nor B

Accepted Answer

Chroma is sometimes called intensity, which is correct according to Technician A. Technician B is incorrect because chroma is actually the dimension of color that describes its purity or saturation, not lightness.

Question 16

Technician A says that metamerism is a condition by which a color appears different under different types of light. Technician A says that reflection means a light passes through something and a different color comes out the other side. Who is correct?
A) A only
B) B only
C) Both A and B
D) Neither A nor B

Accepted Answer

Technician A is correct about metamerism, but Technician B's definition of reflection is incorrect. Reflection occurs when light bounces off a surface without passing through it.

Question 17

Primary colors are yellow, blue, red, and green.

Accepted Answer

Primary colors are often considered to be red, blue, and yellow. Some may argue that green could also be considered a primary color in certain contexts, but it is not universally accepted as one.

Question 18

To determine the number of coats needed for a multi-stage color, a sprayout panel should be made.

Accepted Answer

The answer of To determine the number of coats needed...

Question 19

Technician A says that if a color is found to be a non-blendable color, the first consideration should be tinting. Technician B says that color can only move either right or left of itself on a color wheel, when describing a color. Who is correct?
A) A only
B) B only
C) Both A and B
D) Neither A nor B

Accepted Answer

The answer of Technician A says that if a color...

Question 20

ROY G BIV is a mnemonic (memory device) for red, orange, yellow, green, blue, indigo, and violet.

Accepted Answer

The mnemonic ROY G BIV stands for the colors of the visible spectrum in order: red, orange, yellow, green, blue, indigo, and violet.

Quiz 31: Color Evaluation and Adjustment

Color is described as having three dimensions: ____________________, value, and chroma

Technician A says that factory color codes are found on the driver's door of vehicles. Technician B says that CRI stands for Color Rendering Index. Who is correct?

Technician A says that color fatigue can occur after staring at a color for only 2 seconds. Technician B says that a side tone angle means a vehicle's color is evaluated at a 450 to 600 angle. Who is correct?

A ____________________ panel is a panel that is used to match a multi-stage finish. It is generally larger than a sprayout panel and should have a hiding sticker applied.

Technician A says that value describes how intense a color is. Technician B says that Albert H. Munsell developed a 3-dimensional color tree used to identify and describe color. Who is correct?

Depending on the light source and whether it contains a full color spectrum of wavelengths may cause the paint to look different in different types of light, or to have ____________________.

Technician A says that reflection means light bounces off of a surface and a color is viewed. Technician B says that a color variance on a vehicle can occur because a model of a car could be painted at different factories. Who is correct?

Mica is a semi-transparent crystalline material that absorbs and both reflects and ____________________ light in a prismatic fashion.

The color wheel used for automotive tinting uses four divisions of color: red, yellow, blue, and ____________________.

Technician A says that color deficiency means a person sees no color at all. Technician B says that metamerism should be judged by viewing it at a side tone angle. Who is correct?

Technician A says that color deficiency affects women more than men. Technician B says that flop is a condition in which a color containing metallic and/or mica looks different at different angles. Who is correct?

When plotting a color, it should be evaluated in the order of value, hue, and chroma.

A sprayout or color effect panel is a test panel used to check a multi-stage color.

Technician A says that hue is the dimension of color that describes its color. Technician B says that CRI is a measurement of color corrected light. Who is correct?

Technician A says that chroma is sometimes call intensity. Technician B says that chroma is the dimension of color that describes it lightness. Who is correct?

Technician A says that metamerism is a condition by which a color appears different under different types of light. Technician A says that reflection means a light passes through something and a different color comes out the other side. Who is correct?

Primary colors are yellow, blue, red, and green.

To determine the number of coats needed for a multi-stage color, a sprayout panel should be made.

Technician A says that if a color is found to be a non-blendable color, the first consideration should be tinting. Technician B says that color can only move either right or left of itself on a color wheel, when describing a color. Who is correct?

ROY G BIV is a mnemonic (memory device) for red, orange, yellow, green, blue, indigo, and violet.

Technician A says that color fatigue can occur after staring at a color for only 2 seconds. Technician B says that a side tone angle means a vehicle's color is evaluated at a 45⁰ to 60⁰ angle. Who is correct?