Question 1

Describe the removed section method.

Accepted Answer

One technique used to show the shape and size of a specific area of an object is a removed section. This method uses a cutting plane showing where a section has been taken, removed from the view, labeled, and relocated on a drawing sheet of the object. If necessary, it can be enlarged and dimensioned.

Question 2

Describe how cross-hatch or section lines are placed on a single piece object.

Accepted Answer

For single piece objects, these uniformly space thin lines are drawn at 30 ° , 45 ° , and 60 ° angles.

Question 3

Explain the revolved section view.

Accepted Answer

A revolved section view uses a centerline instead of a cutting plane to indicate where a section has been taken and rotated 90 ° .

Question 4

If the cutting plane passes completely through the object, the sectional view is called a(n) ____.

Accepted Answer

If the cutting plane passes completely through the object, the resulting sectional view is a full section.

Question 5

In the accompanying figure, the item identified as number 4 identifies materials made of ____.

Accepted Answer

The answer of  In the accompanying figure, the item...

Question 6

The inside details of such an object shown with an exterior view are shown on the drawing by ____ lines.

Accepted Answer

Hidden lines are used to show interior details of an object that cannot be seen from the exterior view.

Question 7

A(n) ____ view uses a centerline instead of a cutting plane to indicate where a section has been taken and rotated 90 ° .

Accepted Answer

A revolved section uses a centerline instead of a cutting plane to indicate where a section has been taken and then rotated 90 degrees. This type of section view is especially useful for showing features that are symmetrically arranged around an axis, such as a screw thread or a gear.

Question 8

The ____ line is either a thick (heavy) line with one long and two short dashes or a series of thick (heavy), equally spaced long dashes.

Accepted Answer

The correct answer is C) cutting plane. A cutting plane line is used in technical drawings to indicate the plane where a section is taken. It is typically represented as a thick (heavy) line with one long and two short dashes or as a series of thick, equally spaced long dashes. This line helps viewers understand where an object is being "cut" to see its interior features in a section view.

Question 9

What is needed when the details inside the part become more complex?

Accepted Answer

The answer of What is needed when the details inside...

Question 10

Describe the cutting plane lines.

Accepted Answer

The answer of Describe the cutting plane lines....

Question 11

In the accompanying figure, the letters identify the ____.

Accepted Answer

The answer of  In the accompanying figure, the letters...

Quiz 26: Cutting Planes, Full Sections, and Section Lining