Question 1

A __________ is a pole-like device with a scale graduated in feet and tenths of a foot.
A) telescope level
B) protractor
C) target rod
D) tripod

Accepted Answer

A target rod is the pole-like device with a scale graduated in feet and tenths of a foot that is commonly used in surveying to measure distances and determine elevations. A telescope level is a device used for leveling, a protractor is a tool used to measure angles, and a tripod is a support structure for surveying instruments.

Question 2

The cutting wheel that comes with most tubing cutters is not designed to cut __________.
A) copper
B) brass
C) steel
D) aluminum

Accepted Answer

The cutting wheel that comes with most tubing cutters is designed to cut copper, brass, and aluminum. However, it is not designed to cut steel, so option C is the correct answer.

Question 3

The coarseness of a saw is called its ____________________.

Accepted Answer

pitch

Question 4

A(n) __________ is used to cut with the grain of the wood.
A) coping saw
B) crosscut saw
C) hacksaw
D) ripsaw

Accepted Answer

A ripsaw is designed specifically to cut with the grain of the wood, while a coping saw is used for intricate cuts, a crosscut saw is used perpendicular to the grain of the wood, and a hacksaw is used for cutting metal.

Question 5

A(n) __________ wrench is used to reach large retaining nuts that hold faucets in place on sinks.
A) open-end wrench
B) adjustable wrench
C) pipe wrench
D) basin wrench

Accepted Answer

A basin wrench is specifically designed to reach and grip onto large retaining nuts that are found in tight spaces, such as underneath sinks. Open-end and adjustable wrenches may not have the proper angle or reach to effectively turn these nuts, and pipe wrenches may damage the nut or surrounding plumbing.

Question 6

The rafter square is also referred to as __________.
A) the framing square
B) the speed square
C) the combination square
D) the builder's square

Accepted Answer

The rafter square is commonly known as the framing square, as it is often used for laying out and marking cuts in framing projects. While the speed square, combination square, and builder's square are all types of squares used in construction and carpentry, they each have distinct features and uses that make them different from the rafter or framing square.

Question 7

The most common mistake people make in using a screwdriver is _____________.
A) using it as a pry bar
B) using the wrong size
C) using the wrong type of tip
D) using a screwdriver with a damaged tip

Accepted Answer

Using the wrong size screwdriver can cause damage to the screw head and make it difficult to remove or further tighten the screw. Using the correct size screwdriver is important for proper use and preservation of tools. The other options are also common mistakes, but using the wrong size is the most common.

Question 8

A hacksaw blade is installed with the teeth pointing ____________________ from the handle.

Accepted Answer

The answer of A hacksaw blade is installed with the...

Question 9

A _________________________ hammer has a square face and a chisel-like cutting edge.

Accepted Answer

The answer of A _________________________ hammer has a square face...

Question 10

The cut made by a saw is called a(n) ____________________.

Accepted Answer

The answer of The cut made by a saw is...

Question 11

A __________ square is a triangular metal tool with several scales used for marking the cuts most often made on rafters.
A) framing square
B) speed square
C) rafter square
D) combination square

Accepted Answer

A speed square is a triangular metal tool used for marking the cuts most often made on rafters, making it the correct choice for this description.

Question 12

A perfectly __________ line is said to be plumb.

Accepted Answer

The answer of A perfectly __________ line is said to...

Question 13

A(n) __________ level is an instrument used in construction for measuring vertical distances over large horizontal areas, such as for the corners of a house foundation.

Accepted Answer

The answer of A(n) __________ level is an instrument used...

Question 14

The __________ square has a moveable head on a 12" blade.
A) framing square
B) speed square
C) rafter square
D) combination square

Accepted Answer

A combination square has a moveable head on a blade, which can be adjusted to measure different angles and lengths.

Question 15

A __________ is a pointed weight that can be attached to a string; it can be used to show where the bottom of a post should go to support a beam or to line a tripod up over a precise point.

Accepted Answer

The answer of A __________ is a pointed weight that...

Question 16

To be plumb means to be ____________________ to the ground.

Accepted Answer

The answer of To be plumb means to be ____________________...

Question 17

A(n) ____________________ saw is used by carpenters to cut the profile of one piece of molding on the end of another piece.

Accepted Answer

The answer of A(n) ____________________ saw is used by carpenters...

Question 18

When using an adjustable wrench, the force is applied toward the ____________________.

Accepted Answer

The answer of When using an adjustable wrench, the force...

Question 19

__________ saws are used to cut wood across its grain.
A) Coping
B) Crosscut
C) Hack
D) Rip

Accepted Answer

Crosscut saws are designed to cut across the grain of wood, producing a smoother finish than rip saws, which are used to cut with the grain. Coping saws are used for intricate cuts, and hack saws are used for cutting metal.

Question 20

A builder's level is an instrument to measure __________.
A) diagonals
B) horizontal planes
C) vertical distances over large horizontal areas
D) perpendicular points

Accepted Answer

The answer of A builder's level is an instrument to...

Quiz 12: Right Angles

A __________ is a pole-like device with a scale graduated in feet and tenths of a foot.

The cutting wheel that comes with most tubing cutters is not designed to cut __________.

The coarseness of a saw is called its ____________________.

A(n) __________ is used to cut with the grain of the wood.

A(n) __________ wrench is used to reach large retaining nuts that hold faucets in place on sinks.

The rafter square is also referred to as __________.

The most common mistake people make in using a screwdriver is _____________.

A hacksaw blade is installed with the teeth pointing ____________________ from the handle.

A _________________________ hammer has a square face and a chisel-like cutting edge.

The cut made by a saw is called a(n) ____________________.

A __________ square is a triangular metal tool with several scales used for marking the cuts most often made on rafters.

A perfectly __________ line is said to be plumb.

A(n) __________ level is an instrument used in construction for measuring vertical distances over large horizontal areas, such as for the corners of a house foundation.

The __________ square has a moveable head on a 12" blade.

A __________ is a pointed weight that can be attached to a string; it can be used to show where the bottom of a post should go to support a beam or to line a tripod up over a precise point.

To be plumb means to be ____________________ to the ground.

A(n) ____________________ saw is used by carpenters to cut the profile of one piece of molding on the end of another piece.

When using an adjustable wrench, the force is applied toward the ____________________.

__________ saws are used to cut wood across its grain.

A builder's level is an instrument to measure __________.