Question 1

When configuring an object's run mode which of the following is true?
A) Setting the run mode to foreground will give the object priority over the target system ahead of any other Business Object.
B) Setting the run mode to exclusive will ensure only one process runs on that resource at a time.
C) Setting the run mode to background will enable the object to run at the same time as foreground and background objects on the same resource.
D) Leaving the run mode blank will allow any number of processes and objects to run at the same time on the same resource.

Accepted Answer

C

Question 2

Study the following configuration: 
A) When the configuration is run in Control Room, it will become stuck in an infinite loop
B) When the configuration is run in Control Room, it will become stuck in an infinite loop until the 'Switch' Environment Variable is changed to True in System Manager
C) When the configuration is run in Control Room, it will become stuck in an infinite loop until the 'Switch' Environment Variable is changed to True in the Control Room
D) When the configuration is run in Control Room, it will fail with an internal error on the first execution of the 'Switch?' stage with the error: Decision did not result in a yes/no answer

Accepted Answer

B

Question 3

Study the following page in a process:  The calculation stages contain the following:  What will be the outcome after the page has run?
A) Data Item Output Value contains A
B) Data Item Output Value contains B
C) Data Item Output Value contains C
D) An Internal Exception will be thrown

Accepted Answer

D

Question 4

If you change a session variable when will the new value be available to the process?
A) Immediately
B) Next time a new case is taken from a WQ
C) Next time resource PC starts
D) Next time the process starts

Accepted Answer

Session variables are updated immediately and the new value is available to the process as soon as it is changed.

Question 5

A business object needs to use a Global Send Keys stage to populate the User Name field in an application entitled Workflow. The application is in focus and cursor is in the User Name field. In order to configure the Global Send Keys, which element needs to be placed in the Element field of the stage below? 
A) Workflow
B) Main Window
C) Login Window
D) Username (Edit Field)

Accepted Answer

The answer of A business object needs to use a...

Question 6

Consider the following flow in an object:  Which of the following statement is true?
A) There just needs to be a wait stage after the start stage to correct this action.
B) There should be a wait stage after every stage in this flow (i.e. after the navigate, read, write stages)
C) If during testing in object studio this flow works, no additional wait stages should be added as they will slow the interface down.
D) There should be an intelligent wait stage after the start stage and after any stage that cause the application we are interfacing with to change

Accepted Answer

The answer of Consider the following flow in an object:...

Question 7

A screen contains four buttons, Find, Save, Close and New. When the buttons are spied, the attributes are identical except for the Window Text attribute. The values for the Windows Text attribute are 'Find' for the Find button, 'Save' for the Save button, 'Close' for the Close button and 'New' for the New Button. The Dynamic Button element has been spied and has the following attributes set:  A navigate stage has been configured to press the Close button:  What additional configuration is required to ensure the Close button is selected by the Navigate stage?
A) Set the Mouse Button value to 'Close'
B) The Params button must be selected and the parameter configured to override the Window Text attribute value to 'Close'
C) It is not possible to select the Close button using the Dynamic Button element because the value is set to 'Find' in the Application Modeller
D) A new element is required with the Window Text value set to 'Close' and the Match Type set to equal

Accepted Answer

The answer of A screen contains four buttons, Find, Save,...

Question 8

When considering an element's attributes in Application Modeller which of the following statements are true? (Choose all that apply.)
A) The attributes are provided to Blue Prism by the Target System
B) The initial selection of attributes made by Blue Prism will always be the optimum attribute set for the element
C) The list of attributes may vary from application type to application type
D) Selected attributes are shown as ticks in the Match column of Application Modeller

Accepted Answer

The attributes are provided by the target system, they can vary between application types, and selected attributes are indicated by ticks in the Match column. The initial selection is not always optimal.

Question 9

What is the syntax for using a collection field in an expression?
A) Like this MyCollection(MyField)
B) Like this MyCollection[MyField]
C) Like this [MyCollection[MyField]]
D) Like this MyCollection.MyField
E) Like this [MyCollection.MyField]

Accepted Answer

The answer of What is the syntax for using a...

Question 10

Study the following page in a process:  Calculation stages will write A, B or C to the Output value data item. What will be the outcome after the page has run?
A) Data Item Output Value contains "A"
B) Data Item Output Value contains "B"
C) Data Item Output Value contains "C"
D) An Internal Exception will be thrown

Accepted Answer

The answer of Study the following page in a process:...

Question 11

How many Start Stages can a sub-page in a Process have?
A) 0
B) 1
C) 2
D) Any Number

Accepted Answer

A sub-page in a Process can have only one Start Stage.

Question 12

Examine the following process flow:  The Orders Collection contains the following data:  The Saved Quantity Data Item is configured as a number with the initial value 0. The Loop Orders stage is configured to loop through the Orders collection. The Get Quantity stage is configured as follows:  What will the data item Saved Quantity contain after the execution of the page?
A) 4
B) 5
C) 10
D) 19

Accepted Answer

The answer of Examine the following process flow:  The...

Question 13

A Blue Prism solution works fine when developing and testing it in Process and Object studio but when it is run in Control Room exceptions occur because of screen elements not being found. What is the most likely cause?
A) The most likely cause for the errors is that your application has changed.
B) The most likely cause for the errors seen in Control Room is that best practice use of wait stages has not been followed.
C) The most likely cause for the errors is that the Object Studio action has not been published and therefore cannot be used by the Process in control room.
D) The most likely cause for the exceptions is that best practice exception handling has not been incorporated into the Process.

Accepted Answer

The most likely cause is that best practice use of wait stages has not been followed, leading to timing issues when the process runs in Control Room.

Question 14

Study the following process flow:  The data item "Loop Counter" is a number data item and has an initial value of 0. The data item "Max Loops" is a number data item and has an initial value of 10. The two stages are configured as follows:  How many times will the Loop Again stage be executed when the page is executed?
A) 10
B) 9
C) 11
D) The loop will be infinite

Accepted Answer

The answer of Study the following process flow:  The...

Question 15

The Order System application has been successfully launched and Blue Prism has navigated the application to the following screen:  There is a requirement to ensure this screen is in focus before any further interfacing is done with the screen. Which is the correct configuration to ensure the New Order screen is in focus?
A) 
B) 
C) 
D)

Accepted Answer

The answer of The Order System application has been successfully...

Question 16

Which of the following statements about Business Objects is true?
A) It is Blue Prism best practice to include business rules within Business Objects
B) A Business Object is configured in the Studio area of Blue Prism
C) A Business Object can be exposed to Control Room
D) Logging of individual stages is not configurable in Business Objects

Accepted Answer

A Business Object is configured in the Studio area of Blue Prism, where processes and objects are designed and built.

Question 17

You identify an element in Application Modeller and it highlights uniquely and can be used in your object flow diagram. The next day you find that Blue Prism cannot identify the same element any longer, your object flow is giving you 'Element not found' exceptions. Which of the following statements is true?
A) This must be an environment issue. The Blue Prism environment must be consistent and persistent, and an element that worked one day and does not work the next day suggests the environment is changeable. The IT team supporting the environment needs to be contacted to fix the problem.
B) The Blue Prism product support team should be contacted to report the issue. This signifies an inconsistency in how the Blue Prism product is working which needs to be fixed.
C) This suggests that Best Practice exception handling has not been implemented in the object. A retry loop around the object stages that are using the element will probably fix the problem.
D) It is common for consistency issues to be found during configuration/development testing. The most likely cause is that an attribute has been selected for the element that is changeable, such as a window title with a date, or a URL. The developer needs to ensure that any changeable attributes are unticked.

Accepted Answer

The issue is likely due to a changeable attribute being used for the element, such as a dynamic window title or URL, which needs to be adjusted to ensure consistency.

Question 18

When automating a Windows application what type of stage is configured to perform a Global Send Key Events?
A) Notes Stage
B) Read Stage
C) Write Stage
D) Navigate Stage

Accepted Answer

The Navigate Stage is used to perform actions like sending key events to a Windows application in automation processes.

Question 19

Which of the following Stages can be found in Process Studio AND Object Studio?
A) 
B) 
C) 
D)

Accepted Answer

The answer of Which of the following Stages can be...

Question 20

When entering an option within the Training Order system the relevant option number is entered into the Option number field as below. The Option number input field has been spied in Blue Prism:  The following attribute set has been returned by Application Modeller:  Which Attribute can be un-ticked to ensure consistent visibility of the element to Blue Prism?
A) Window Text
B) Visible
C) Screen Visible
D) Class Name

Accepted Answer

The answer of When entering an option within the Training...

Exam 1: Blue Prism Developer

When configuring an object's run mode which of the following is true?

Study the following configuration:

Study the following page in a process: The calculation stages contain the following: What will be the outcome after the page has run?

If you change a session variable when will the new value be available to the process?

Consider the following flow in an object: Which of the following statement is true?

When considering an element's attributes in Application Modeller which of the following statements are true? (Choose all that apply.)

What is the syntax for using a collection field in an expression?

Study the following page in a process: Calculation stages will write A, B or C to the Output value data item. What will be the outcome after the page has run?

How many Start Stages can a sub-page in a Process have?

A Blue Prism solution works fine when developing and testing it in Process and Object studio but when it is run in Control Room exceptions occur because of screen elements not being found. What is the most likely cause?

Which of the following statements about Business Objects is true?

When automating a Windows application what type of stage is configured to perform a Global Send Key Events?

Which of the following Stages can be found in Process Studio AND Object Studio?