Question 1

A company with a DR site connected with a 2 Gbps FC link has three vRPAs at each site. They are experiencing High Load events, although the FC link is not fully utilized. What would be the best solution to get the FC link utilization up as high as possible while mitigating those events?
A) Replace the vRPAs with physical RPAs and start using a Distributed Consistency Group
B) Add two more vRPAs to the Primary site and divide the Consistency Group into four segments
C) Divide the Consistency Group into two segments and start using Distributed Consistency Groups
D) Add two RPAs to the Primary site as well as the secondary site

Accepted Answer

The answer of A company with a DR site connected...

Question 2

What is used when more performance is needed than a single RPA can provide for asynchronous replication?
A) Distributed Consistency Groups
B) Journal compression
C) Fibre Channel connections
D) Multi-cluster copies

Accepted Answer

Distributed Consistency Groups are used to enhance performance for asynchronous replication beyond what a single RPA can provide.

Question 3

When logging into an unattached RecoverPoint appliance for the first time, which username and password combination must be used?
A) usernamE. boxmgmt passworD. boxmgmt
B) usernamE. admin passworD. Mi@Dim7T
C) passworD. admin
D) usernamE. service passworD. service

Accepted Answer

The default username is "username" and the default password is "boxmgmt".

Question 4

System events can be copied to the clipboard from which Unisphere for RecoverPoint view?
A) RecoverPoint Dashboard
B) Recovery
C) RPA Clusters
D) Admin

Accepted Answer

The RecoverPoint Dashboard view in Unisphere for RecoverPoint allows users to copy system events to the clipboard for further analysis or reporting.

Question 5

You are working on a RecoverPoint local replication solution in an environment that includes VNX and VMAX storage arrays. You want to create a Consistency Group (CG) for your Oracle database. However, some of the database volumes are located in the VNX and others are located in the VMAX. What is the recommended management solution?
A) Create one CG using VNX and VMAX volumes
B) Create a new RecoverPoint cluster and add the VNX splitter
C) Migrate all LUNs to the VMAX
D) Create two CGs: one for VNX volumes and another for VMAX volumes

Accepted Answer

The answer of You are working on a RecoverPoint local...

Question 6

After selecting a cluster in the RPA Clusters tab, which option can display alerts that have been logged for any of the physical components of the RecoverPoint system in that cluster?
A) General Cluster Info
B) Overall Health
C) System Events
D) System Notifications

Accepted Answer

The answer of After selecting a cluster in the RPA...

Question 7

Which journal action available in Unisphere for RecoverPoint will NOT result in a full sweep synchronization and the loss of all history in the existing journal?
A) Add a journal volume
B) Remove a journal volume
C) Expand a journal volume
D) Reduce a journal volume

Accepted Answer

Adding a journal volume does not require a full sweep synchronization and does not result in the loss of all history in the existing journal. It simply increases the capacity of the journal.

Question 8

You are protecting a volume using the wizard in Unisphere for RecoverPoint. Which state will the new Consistency Group be in immediately after completing the wizard?
A) Initializing
B) Active
C) Paused
D) Disabled

Accepted Answer

Immediately after completing the wizard in Unisphere for RecoverPoint, the new Consistency Group will be in the "Initializing" state as it begins the process of setting up and synchronizing the data.

Question 9

In the Recovery tab of Unisphere for RecoverPoint, which option is used to temporarily mount an image?
A) Test a Copy
B) Enable Image Access
C) Manage Recovery
D) Enable Direct Access

Accepted Answer

The answer of In the Recovery tab of Unisphere for...

Question 10

Which Unisphere for RecoverPoint view displays both the system traffic and Consistency Group status?
A) RecoverPoint Dashboard
B) Recovery
C) RPA Clusters
D) Admin

Accepted Answer

The RecoverPoint Dashboard view in Unisphere for RecoverPoint displays both the system traffic and Consistency Group status, providing a comprehensive overview of the system's performance and health.

Question 11

The Getting Started wizard that is displayed the first time a user accesses Unisphere for RecoverPoint assists with performing what action?
A) Adding licenses
B) Adding splitters
C) Configuring RPAs
D) Creating Consistency Groups

Accepted Answer

The Getting Started wizard assists with adding licenses.

Question 12

A storage administrator has a RecoverPoint environment with vRPAs containing 64 Consistency Groups (CGs). They want to create distributed CGs. What is the maximum number of distributed CGs that can be added to this particular system?
A) 0
B) 8
C) 40
D) 128

Accepted Answer

The maximum number of distributed Consistency Groups (CGs) that can be added to a RecoverPoint system with vRPAs is 0 if the system already contains 64 CGs, as this is the maximum limit for CGs in such a configuration.

Question 13

What is the minimum size of the journal when using Distributed Consistency Groups?
A) 5 GB
B) 20 GB
C) 40 GB
D) 60 GB

Accepted Answer

The minimum size of the journal when using Distributed Consistency Groups is 40 GB.

Question 14

In order to create a new Consistency Group, a user should navigate to which option within the Protection tab of Unisphere for RecoverPoint?
A) Protect Volumes
B) Manage Protection
C) Deployment Manager
D) Group Sets

Accepted Answer

The answer of In order to create a new Consistency...

Question 15

A storage administrator has an implementation with 40 Consistency Groups (CGs). They need to create distributed CGs. What is the maximum number of distributed CGs that can be added to this particular system?
A) 8
B) 16
C) 24
D) 128

Accepted Answer

A distributed CG can be created only if there are less than 16 CGs in the system.

Question 16

What should be used when more performance is needed than a single RPA can provide for asynchronous replication?
A) Distributed Consistency Groups
B) Journal Compression
C) Fibre Channel connections
D) Multi-Cluster copies

Accepted Answer

Distributed Consistency Groups allow for the distribution of replication tasks across multiple RPAs, enhancing performance for asynchronous replication.

Question 17

A company has a DR site connected using a 4 Gbps FC link and two RPAs on the primary site, and two RPAs at the DR site. They are experiencing high load events although the FC link is not fully utilized. What would be the best solution to get the FC link utilization up as high as possible?
A) Add two RPAs to the primary site and add two RPAs to the DR site
B) Add two RPAs to the primary site only
C) Use distributed consistency groups with one primary RPA and two secondary RPAs on the primary site
D) Add two RPAs to the DR site only

Accepted Answer

Adding two RPAs to both the primary and DR sites can help balance the load and improve the utilization of the FC link by distributing the replication tasks more evenly across more RPAs.

Question 18

In Unisphere for RecoverPoint, where should a user navigate in order to collect logs for support purposes?
A) Admin Tab > System Analysis Tools > Collect System Information
B) Admin Tab > System Notifications > Configure System Reports and Alerts
C) Dashboard Tab > System Analysis Tools > Detect Bottlenecks
D) Admin Tab > RPA Clusters > Export Consolidated Statistics

Accepted Answer

The correct navigation to collect logs for support purposes in Unisphere for RecoverPoint is through the Admin Tab > System Analysis Tools > Collect System Information. This option is specifically designed for gathering system logs and information needed for troubleshooting and support.

Question 19

Which RecoverPoint feature allows the protection of volumes on both sides of a VPLEX Metro Cluster?
A) MetroPoint
B) Continuous Remote Replication
C) Distributed Consistency Groups
D) Group Sets

Accepted Answer

MetroPoint is a feature that enables the protection of volumes on both sides of a VPLEX Metro Cluster by integrating with RecoverPoint.

Question 20

A company with a DR site connected with a 2 Gbps FC link has three RPAs at each site. They are experiencing High Load events, although the FC link is not fully utilized. What would be the best solution to get the FC link utilization up as high as possible while mitigating those events?
A) Use a Distributed Consistency Group
B) Add one RPA to the Primary site
C) Use the Consistency Group on both RPAs and add two RPAs to the secondary site
D) Add one RPA to the DR site

Accepted Answer

Using a Distributed Consistency Group can help balance the load across multiple RPAs, improving the utilization of the FC link and mitigating High Load events.

Exam 2: XtremIO Solutions Specialist Exam for Implementation Engineers

A company with a DR site connected with a 2 Gbps FC link has three vRPAs at each site. They are experiencing High Load events, although the FC link is not fully utilized. What would be the best solution to get the FC link utilization up as high as possible while mitigating those events?

What is used when more performance is needed than a single RPA can provide for asynchronous replication?

When logging into an unattached RecoverPoint appliance for the first time, which username and password combination must be used?

System events can be copied to the clipboard from which Unisphere for RecoverPoint view?

After selecting a cluster in the RPA Clusters tab, which option can display alerts that have been logged for any of the physical components of the RecoverPoint system in that cluster?

Which journal action available in Unisphere for RecoverPoint will NOT result in a full sweep synchronization and the loss of all history in the existing journal?

You are protecting a volume using the wizard in Unisphere for RecoverPoint. Which state will the new Consistency Group be in immediately after completing the wizard?

In the Recovery tab of Unisphere for RecoverPoint, which option is used to temporarily mount an image?

Which Unisphere for RecoverPoint view displays both the system traffic and Consistency Group status?

The Getting Started wizard that is displayed the first time a user accesses Unisphere for RecoverPoint assists with performing what action?

A storage administrator has a RecoverPoint environment with vRPAs containing 64 Consistency Groups (CGs) . They want to create distributed CGs. What is the maximum number of distributed CGs that can be added to this particular system?

What is the minimum size of the journal when using Distributed Consistency Groups?

In order to create a new Consistency Group, a user should navigate to which option within the Protection tab of Unisphere for RecoverPoint?

A storage administrator has an implementation with 40 Consistency Groups (CGs) . They need to create distributed CGs. What is the maximum number of distributed CGs that can be added to this particular system?

What should be used when more performance is needed than a single RPA can provide for asynchronous replication?

A company has a DR site connected using a 4 Gbps FC link and two RPAs on the primary site, and two RPAs at the DR site. They are experiencing high load events although the FC link is not fully utilized. What would be the best solution to get the FC link utilization up as high as possible?

In Unisphere for RecoverPoint, where should a user navigate in order to collect logs for support purposes?

Which RecoverPoint feature allows the protection of volumes on both sides of a VPLEX Metro Cluster?

A company with a DR site connected with a 2 Gbps FC link has three RPAs at each site. They are experiencing High Load events, although the FC link is not fully utilized. What would be the best solution to get the FC link utilization up as high as possible while mitigating those events?