A Cisco UCS B-Series Blade Server is configured to boot a VMware ESXi host from an EMC VNX storage array by using a Fibre Channel SAN. The boot order is confirmed to be configured as expected, but the server fails to boot from the SAN. Which action resolves the problem?
A) Set the boot LUN to the highest LUN ID in the storage array.
B) Set the boot LUN to the lowest LUN ID in the storage array.
C) Set the same WWNN pools for vHBA adapters.
D) Set the same WWPN pools for vHBA adapters.

Question

Quizplus · Accepted Answer

The WWNN pools for vHBA adapters must be set to the same value to ensure that the server can boot from the SAN.

A Cisco UCS B-Series Blade Server Is Configured to Boot