Question 1

Which two statements describe modifying Cisco UCS user accounts? (Choose two.)

Accepted Answer

A: Disabling a user account maintains all of the data in the Cisco UCS Fabric Interconnect.D: Local user accounts override the same account on a remote authentication server, such as TACACS, RADIUS, or LDAP.

Question 2

Refer to the exhibit. An engineer is configuring a VSAN on the network. Which option must be selected to create the VSAN?

Accepted Answer

The answer of  Refer to the exhibit. An engineer...

Question 3

The Cisco Nexus 5600 Series Switch experiences occasional packet drops on interface ethernet 1/16. An engineer wants to implement a SPAN session to investigate the issue further. The network analyzer to which the packets must be directed is located on interface 1/3. The analyzer is limited on disk space available for traffic capture, so the Nexus switch should send only the relevant data. Which two command sets configure the SPAN session that meets these requirements? (Choose two.)

Accepted Answer

The answer of The Cisco Nexus 5600 Series Switch experiences...

Question 4

What are two types of FC/FCoE oversubscription ratios? (Choose two.)

Accepted Answer

The answer of What are two types of FC/FCoE oversubscription...

Question 5

Which statement describes the MAC address that the FCoE Initialization Protocol chooses for use by an E-Node in an FCoE implementation?

Accepted Answer

The FCoE Initialization Protocol uses a 24-bit FC-MAP and concatenates a 24-bit Fibre Channel ID to create a fabric-provided MAC address, which is used by the E-Node in an FCoE implementation.

Question 6

Which statement is true about upgrading the firmware on a Cisco MDS storage switch with dual supervisors?

Accepted Answer

The new firmware is typically loaded on the standby supervisor first to ensure that the active supervisor continues to manage the switch without interruption.

Question 7

An engineer needs to monitor ingress traffic that arrives at interface Ethernet 1/3 that belongs to a Cisco Nexus 5600 Series Switch. The traffic analyzer machine located at interface Ethernet 1/5 is already monitoring other production, and the traffic analyzer must not be impacted by the traffic captured from the interface Eth1/3. The operations team allocated a traffic budget for the new monitoring session of 1 Gbps to meet this requirement. Which set of commands configures the SPAN session?

Accepted Answer

The answer of An engineer needs to monitor ingress traffic...

Question 8

An engineer needs to make an XML backup of Cisco UCS Manager. The backup should be transferred using an authenticated and encrypted tunnel, and it should contain all system and service profiles configuration. Which command must be implemented to meet these requirements?

Accepted Answer

The command "copy running-config scp:// user@host35/backups/all-config9.bak all-configuration" uses SCP (Secure Copy Protocol) which provides an authenticated and encrypted tunnel for transferring the backup, and "all-configuration" specifies that it includes all system and service profiles configuration.

Question 9

A network engineer must configure a power redundancy policy on a Cisco UCS C-Series Rack Server. The power redundancy must support two power sources being used to power the server. Which configuration should be applied to meet the requirement?

Accepted Answer

The answer of A network engineer must configure a power...

Question 10

An engineer needs to perform a backup of user roles and locales from Cisco UCS Manager to replicate the setting to a different fabric interconnect. The engineer wants to review the file before importing it to a target fabric interconnect. Which backup type must be selected to meet these requirements?

Accepted Answer

The answer of An engineer needs to perform a backup...

Question 11

A Cisco UCS user called "Employee1" accidentally changed the boot policy of the Cisco UCS server at the Cisco UCS Manager root level. This change impacted all service profiles, and their storage connectivity was lost. The system administrator wants to prevent this issue from recurring in the future. The new security policy mandates that access must be restricted up to the organization level and prevent other users from modifying root policies. Which action must be taken to meet these requirements?

Accepted Answer

The answer of A Cisco UCS user called "Employee1" accidentally...

Question 12

Refer to the exhibit.  An engineer is implementing zoning on two Cisco MDS switches. After the implementation is finished, E Ports that connect the two Cisco MDS switches become isolated. What is wrong with the implementation?

Accepted Answer

The answer of Refer to the exhibit.  An engineer...

Question 13

A network engineer plans to upgrade the firmware of a Cisco UCS B-Series chassis by using the Auto Install feature. Which component is upgraded during the infrastructure firmware upgrade stage?

Accepted Answer

During the infrastructure firmware upgrade stage in a Cisco UCS B-Series chassis, the I/O Modules are upgraded.

Question 14

Which product includes prebuilt templates that are available to be used to customize fabric deployments?

Accepted Answer

The answer of Which product includes prebuilt templates that are...

Question 15

Which configuration statically assigns VSAN membership to a virtual Fibre Channel interface?

Accepted Answer

The command "vsan 100 interface vfc 31" is used to statically assign a VSAN to a virtual Fibre Channel (vfc) interface.

Question 16

An engineer is implementing FCoE. Which aspect of DCBXP on a Cisco Nexus switch affects this implementation?

Accepted Answer

DCBXP (Data Center Bridging Exchange Protocol) requires LLDP (Link Layer Discovery Protocol) to be enabled for both transmit and receive on the FCoE interface to exchange configuration information between peers.

Question 17

An engineer is converting a Cisco MDS switch to support NPIV mode. What should be considered when implementing the solution?

Accepted Answer

NPIV (N_Port ID Virtualization) must be enabled globally on all VSANs on a Cisco MDS switch to allow multiple virtual N_Ports to share a single physical N_Port.

Question 18

An engineer is implementing NPV mode on a Cisco MDS 9000 Series Switch. Which action must be taken?

Accepted Answer

NPV (N-Port Virtualization) mode requires NPIV (N-Port ID Virtualization) to be enabled on the upstream switch to allow multiple virtual N_Ports to share a single physical N_Port.

Question 19

In an FCoE environment, for which two sets of data must an interface that implements the PAUSE mechanism always provision sufficient ingress buffer? (Choose two.)

Accepted Answer

In an FCoE environment, an interface implementing the PAUSE mechanism must provision sufficient ingress buffer for frames that were sent on the link but not yet received (B) and frames that were processed and transmitted by the transmitter before the PAUSE frame left the sender (D). This ensures that frames in transit and those already sent before the PAUSE command are properly buffered.

Question 20

Refer to the exhibit. An engineer must configure FCoE on a Cisco Nexus switch. Which two command sets complete this configuration? (Choose two.)

Accepted Answer