Matching
Match each term with the correct statement below.
Premises:
rough calculation of all known elements of the link to determine if the signal will have the proper strength when it reaches the other end of the link
device that decreases the RF signal
SNMP-based tool used to monitor LANs that are connected through a wide area network
software that is embedded into hardware to control the device
device that has a single input connector and multiple output connectors
part of SNMP that monitors network traffic and stores that information in its management information base
antenna gain (dBi) less cable loss (dB) at the receiver and receiver sensitivity (dBm)
decreases interference by attenuating unwanted sources of interference
attempting to readjust the settings of the AP after a firmware upgrade
Responses:
link budget
RF site tuning
Remote Monitoring
splitter
effective receiving sensibility
software agent
firmware
beam steering
attenuator
Correct Answer:
Premises:
Responses:
rough calculation of all known elements of the link to determine if the signal will have the proper strength when it reaches the other end of the link
device that decreases the RF signal
SNMP-based tool used to monitor LANs that are connected through a wide area network
software that is embedded into hardware to control the device
device that has a single input connector and multiple output connectors
part of SNMP that monitors network traffic and stores that information in its management information base
antenna gain (dBi) less cable loss (dB) at the receiver and receiver sensitivity (dBm)
decreases interference by attenuating unwanted sources of interference
attempting to readjust the settings of the AP after a firmware upgrade
Premises:
rough calculation of all known elements of the link to determine if the signal will have the proper strength when it reaches the other end of the link
device that decreases the RF signal
SNMP-based tool used to monitor LANs that are connected through a wide area network
software that is embedded into hardware to control the device
device that has a single input connector and multiple output connectors
part of SNMP that monitors network traffic and stores that information in its management information base
antenna gain (dBi) less cable loss (dB) at the receiver and receiver sensitivity (dBm)
decreases interference by attenuating unwanted sources of interference
attempting to readjust the settings of the AP after a firmware upgrade
Responses:
Related Questions
Q23: In order to use SNMP,a software _
Q28: Although data from the access point and
Q32: What is Remote Monitoring?
Q34: Describe a sectorized antenna.
Q36: The first step in creating a security
Q37: What technique(s) is/are most effective for defeating
Q37: _ engineering relies on tricking or deceiving
Q39: A _ limits the amplitude and disturbing
Q40: What are the factors that should be
Q41: When creating a functional (working) security policy,
Unlock this Answer For Free Now!
View this answer and more for free by performing one of the following actions
Scan the QR code to install the App and get 2 free unlocks
Unlock quizzes for free by uploading documents