Question 1

For any fire to continue to burn, three components must be present. These are:
A) fuel, wood and cardboard
B) petrol, oxygen and bottled gas
C) flames, fuel and heat
D) fuel, oxygen and heat.

Accepted Answer

For any fire to continue to burn, three components must be present which are fuel, oxygen and heat. It is the combination of these three elements that creates and sustains a flame.

Question 2

The Electricity at Work Regulations absolutely forbid the following work activity:
A) working at height
B) testing live electrical systems
C) live repair work on electrical circuits
D) working without the appropriate PPE.

Accepted Answer

The Electricity at Work Regulations prohibit live repair work on electrical circuits. This means that any work involving electrical circuits must be carried out with the circuits switched off and safely isolated. This is to ensure the safety of workers and prevent electrical accidents. Working at height, testing live electrical systems, and working without appropriate PPE are also forbidden but are not as serious as live repair work on electrical circuits.

Question 3

A foam fire extinguisher is suitable for use on small fires of burning ….
A) wood, paper and fabric
B) flammable liquids
C) flammable gas
D) all of the above

Accepted Answer

A,B

Question 4

A carbon dioxide gas fire extinguisher is suitable for use on small fires of burning…..
A) wood, paper and fabric
B) flammable liquids
C) flammable gas
D) all of the above

Accepted Answer

Carbon dioxide gas fire extinguishers are suitable for use on flammable liquids because CO2 displaces oxygen, which is necessary for combustion, without leaving a residue that could further damage materials. They are not suitable for wood, paper, fabric, or flammable gas fires.

Question 5

A Statutory Regulation…..
A) is the law of the land
B) must be obeyed
C) tells us how to comply with the law
D) is a code of practice.

Accepted Answer

A statutory regulation is a formal rule created by a government agency or other authority that has the force of law. As such, it is the law of the land and must be obeyed like any other law or ordinance. It does not, however, provide guidance on how to comply with the law or serve as a code of practice.

Question 6

A Non-statutory Regulation…..
A) is the law of the land
B) must be obeyed
C) tells us how to comply with the law
D) is a code of practice.

Accepted Answer

The answer of A Non-statutory Regulation…..
A) is the law of...

Question 7

Under the Health and Safety at Work Act an employer is responsible for….
A) maintaining plant and equipment
B) providing PPE
C) wearing PPE
D) taking reasonable care to avoid injury.

Accepted Answer

The answer of Under the Health and Safety at Work...

Question 8

Under the Health and Safety at Work Act an employee is responsible for…..
A) maintaining plant and equipment
B) providing PPE
C) wearing PPE
D) taking reasonable care to avoid injury.

Accepted Answer

Under the Health and Safety at Work Act, employees are responsible for wearing personal protective equipment (PPE) provided to them and taking reasonable care of themselves and others to avoid injury.

Question 9

The IET Wiring Regulations…..
A) are statutory regulations
B) are non-statutory regulations
C) are codes of good practice
D) must always be complied with.

Accepted Answer

The IET Wiring Regulations are non-statutory regulations, meaning they are not legally required but are widely recognized as a standard for electrical installations.

Question 10

Before beginning work on a 'live' circuit or piece of equipment you should…..
A) only work 'live' if your supervisor is with you
B) only work 'live' if you feel that you are 'competent' to do so
C) isolate the circuit or equipment before work commences
D) secure the isolation before work commences.

Accepted Answer

Isolating the circuit or equipment before work commences (C) ensures that the power supply is disconnected, making it safe to work on. Securing the isolation (D) ensures that the power cannot be inadvertently reconnected while work is in progress, providing an additional layer of safety.

Question 11

Two of the most common categories of risk and causes of accidents at work are…..
A) slips, trips and falls
B) put guards around the hazard
C) manual handling
D) use safe systems of work.

Accepted Answer

Slips, trips, and falls are one of the most common categories of accidents at work. These can occur due to wet or icy floors, uneven surfaces, cluttered walkways, and inadequate lighting. To prevent slips, trips, and falls, employers can implement measures such as cleaning up spills promptly, keeping walkways free of clutter, and providing adequate lighting and signage.

Manual handling is another common cause of accidents at work. This refers to activities that involve lifting, carrying, pushing, or pulling objects by hand. Improper manual handling can lead to injuries such as strains, sprains, and musculoskeletal disorders. To prevent manual handling accidents, employers can implement measures such as providing training on proper lifting techniques, using mechanical aids to reduce the need for manual handling, and ensuring that loads are within safe weights limits.

Question 12

Two of the most common precautions taken to control risks are…..
A) slips, trips and falls
B) put guards around the hazard
C) manual handling
D) use safe systems of work.

Accepted Answer

The answer of Two of the most common precautions taken...

Question 13

Employers of companies employing more than five people must…..
A) become a member of the NICEIC
B) provide PPE if appropriate
C) carry out a hazard risk assessment
D) display a health and safety poster.

Accepted Answer

The answer of Employers of companies employing more than five...

Question 14

The Electricity at Work Regulations tell us that 'we must ensure the disconnection and separation of electrical equipment from every source of supply and the separation must be secure'. A procedure to comply with this regulation is called…..
A) work at height
B) a hazard risk assessment
C) a safe isolation procedure
D) a workstation risk assessment.

Accepted Answer

The statement given refers to the requirement of safe isolation procedure as per the Electricity at Work Regulations. Work at height, hazard risk assessment, and workstation risk assessment are different procedures that are not directly related to this regulation.

Question 15

The most appropriate piece of equipment to use for gaining access to a permanent scaffold would be…..
A) a ladder
B) a trestle scaffold
C) a mobile scaffold tower
D) a pair of sky hooks.

Accepted Answer

A ladder is the most appropriate and commonly used equipment for gaining access to a permanent scaffold, as it provides a simple and safe means to reach higher levels. Trestle scaffolds and mobile scaffold towers are types of scaffolding themselves and are not typically used to access other scaffolds. Sky hooks are not a practical or real method for accessing scaffolds.

Question 16

When working above ground for long periods of time the most appropriate piece of equipment to use would be…..
A) a ladder
B) a trestle scaffold
C) a mobile scaffold tower
D) a pair of sky hooks.

Accepted Answer

A mobile scaffold tower is designed for safe and efficient work at height over long periods. It provides a stable platform, can be easily moved, and offers features like guardrails for safety, unlike ladders or trestle scaffolds which are less stable and secure for prolonged use. Sky hooks are not a practical or real piece of equipment for this purpose.

Question 17

A water fire extinguisher is suitable for use on small fires of burning…
A) wood, paper and fabric
B) flammable liquids
C) flammable gas
D) all of the above

Accepted Answer

A water fire extinguisher is effective on Class A fires, which involve burning wood, paper, fabric, and other ordinary combustibles. It may not be effective or safe to use on Class B or C fires involving flammable liquids or gases.

Question 18

A dry powder fire extinguisher is suitable for use on small fires of burning…..
A) wood, paper and fabric
B) flammable liquids
C) flammable gas
D) all of the above

Accepted Answer

Dry powder fire extinguishers are versatile and can be used on various types of fires, including those involving wood, paper, fabric (Class A), flammable liquids (Class B), and flammable gases (Class C).

Question 19

A vaporizing foam fire extinguisher is suitable for use on small fires of burning…..
A) wood, paper and fabric
B) flammable liquids
C) flammable gas
D) all of the above

Accepted Answer

Vaporizing foam fire extinguishers are versatile and can be used on various types of small fires, including those involving wood, paper, fabric, and flammable liquids. They work by forming a cooling blanket over the fire, cutting off the oxygen supply and preventing re-ignition.

Question 20

You should only attack a fire with a fire extinguisher if…..
A) it is burning brightly
B) you can save someone's property
C) you can save someone's life
D) you can do so without putting yourself at risk.

Accepted Answer

Using a fire extinguisher can be dangerous if not used properly, so it's crucial to ensure you can do so without putting yourself at risk. It's also important to remember that a fire can easily become uncontrollable, so only attempt to extinguish the fire if it's small and you can easily contain it. Saving property or someone's life are also important reasons to use a fire extinguisher, but only if you can do so safely.

Quiz 1: Health and Safety in Building Services Engineering

For any fire to continue to burn, three components must be present. These are:

The Electricity at Work Regulations absolutely forbid the following work activity:

A foam fire extinguisher is suitable for use on small fires of burning ….

A carbon dioxide gas fire extinguisher is suitable for use on small fires of burning…..

A Statutory Regulation…..

A Non-statutory Regulation…..

Under the Health and Safety at Work Act an employer is responsible for….

Under the Health and Safety at Work Act an employee is responsible for…..

The IET Wiring Regulations…..

Before beginning work on a 'live' circuit or piece of equipment you should…..

Two of the most common categories of risk and causes of accidents at work are…..

Two of the most common precautions taken to control risks are…..

Employers of companies employing more than five people must…..

The Electricity at Work Regulations tell us that 'we must ensure the disconnection and separation of electrical equipment from every source of supply and the separation must be secure'. A procedure to comply with this regulation is called…..

The most appropriate piece of equipment to use for gaining access to a permanent scaffold would be…..

When working above ground for long periods of time the most appropriate piece of equipment to use would be…..

A water fire extinguisher is suitable for use on small fires of burning…

A dry powder fire extinguisher is suitable for use on small fires of burning…..

A vaporizing foam fire extinguisher is suitable for use on small fires of burning…..

You should only attack a fire with a fire extinguisher if…..