Question 1

Pick up the excavation where measurements are made in square metres for payment.
A)ordinary cuttings up to 1 m
B)surface dressing up to 15 cm depths
C)surface excavation up to 30 cm depths
D)both (b) and (c)

Accepted Answer

Surface dressing up to 15 cm depths and surface excavation up to 30 cm depths are typically measured in square metres because they involve shallow depths over large areas, making square metre a more appropriate unit of measurement for payment purposes.

Question 2

As per Indian Standard Specifications, the peak discharge for domestic purposes per capita per minute, is taken
A)1.80 litres for 5 to 10 users
B)1.20 litres for 15 users
C)1.35 for 20 users
D)all the above

Accepted Answer

The Indian Standard Specifications for peak discharge for domestic purposes per capita per minute include all the listed options, taking into account the number of users.

Question 3

In long and short wall method of estimation, the length of long wall is the centre to centre distance between the walls and
A)breadth of the wall
B)half breadth of wall on each side
C)one fourth breadth of wall on each side
D)none of these

Accepted Answer

In the long and short wall method of estimation, the length of the long wall is calculated by taking the center-to-center distance between the walls and adding half the breadth of the wall on each side to account for the total wall length.

Question 4

The expected out turn of cement concrete 1 : 2 : 4 per mason per day is A)1.5 m³ B)2.5 m³ C)3.5 m³ D)5.0 m³

Accepted Answer

The answer of The expected out turn of cement concrete...

Question 5

The value of 'C' of Indian type W.C. shown in the given figure is: 
A)400 mm
B)450 mm
C)500 mm
D)550 mm

Accepted Answer

The answer of The value of 'C' of Indian type...

Question 6

The area is measured correct to the nearest
A)0.01 sqm
B)0.02 sqm
C)0.03 sqm
D)0.04 sqm

Accepted Answer

When measurements are said to be correct to the nearest 0.01, it means the precision of the measurement is within plus or minus 0.005 of the true value, making it the most precise option listed.

Question 7

The measurement is not made in square metres in case of
A)d.p.c. (damp proof course)
B)form works
C)concrete jeffries
D)r.c. chhajja

Accepted Answer

The answer of The measurement is not made in square...

Question 8

The value of 'A' of Indian type W.C. shown in the given figure is: 
A)25 cm
B)30 cm
C)40 cm
D)45 cm

Accepted Answer

The answer of The value of 'A' of Indian type...

Question 9

The trap which is provided to disconnect the house drain from the street sewer is called
A)master trap
B)intercepting trap
C)interception manhole
D)all the above

Accepted Answer

All the options provided are terms used to describe a device or structure designed to disconnect the house drain from the street sewer. The master trap, intercepting trap, and interception manhole all serve the purpose of preventing gases, odors, and backflow from the sewer into the house system.

Question 10

Due to change in price level, a revised estimate is prepared if the sanctioned estimate exceeds
A)2.0 %
B)2.5 %
C)4.0 %
D)5.0 %

Accepted Answer

A revised estimate is typically prepared if the sanctioned estimate exceeds 5.0% due to a change in the price level. This threshold is set to manage budget and control costs effectively in projects.

Question 11

The cost of the earthwork in excavation for the surface drain of cross-section shown in the given figure for a total length of 5 metres @ Rs. 450% cum, is 
A)rs. 400
B)rs. 425
C)rs. 450
D)rs. 500

Accepted Answer

The answer of The cost of the earthwork in excavation...

Question 12

The expected out turn of 2.5 cm cement concrete floor per mansion per day
A)2.5 sqm
B)5.0 sqm
C)7.5 sqm
D)10 sqm

Accepted Answer

The expected output for a 2.5 cm cement concrete floor per mason per day is typically around 7.5 sqm, based on standard productivity rates in construction.

Question 13

Pick up the correct statement from the following:
A)the bent up bars at a support resist the negative bending moment
B)the bent up bars at a support resist the sharing force
C)the bending of bars near supports is generally at 45°
D)all the above

Accepted Answer

Bent up bars at a support are designed to resist negative bending moments and shear forces, and they are typically bent at an angle of 45° to effectively transfer the stresses.

Question 14

While preparing a detailed estimate
A)dimension should be measured correct to 0.01 m
B)area should be measured correct to 0.01 sqm
C)volume should be measured correct to 0.01 cum
D)all the above

Accepted Answer

In detailed estimating, accuracy is crucial, hence dimensions, areas, and volumes should all be measured to a precision of 0.01 to ensure the estimate is as accurate as possible.

Question 15

The item of the brick structure measured in sq.m, is
A)reinforced brick work
B)broken glass coping
C)brick edging
D)brick work in arches

Accepted Answer

The answer of The item of the brick structure measured...

Question 16

The most reliable estimate is
A)detailed estimate
B)preliminary estimate
C)plinth area estimate
D)cube rate estimate

Accepted Answer

A detailed estimate is the most reliable because it involves a thorough analysis and calculation of all the necessary materials, labor, and costs associated with a project, providing the most accurate and comprehensive understanding of the project's financial requirements.

Question 17

According to ISI method of measurement, the order of the sequence is
A)length, breadth, height
B)breadth, length, height
C)height, length, breadth
D)none of these

Accepted Answer

The ISI method of measurement specifies dimensions in the order of length, breadth, and height.

Question 18

Anti-siphonage pipe is connected to
A)main soil pipe
B)bottom of p trap w.c.
C)top of p trap w.c.
D)side of water closet

Accepted Answer

Anti-siphonage pipes are connected to the top of P traps to prevent the siphoning effect that can remove the water seal and allow sewer gases to enter the building.

Question 19

Pick up the correct statement from the following:
A)in a gully trap, a water seal of 6 to 7.5 cm is provided
B)the gully trap collects waste water from the kitchen, sink, wash basins, etc.
C)the gully trap disconnects the sullage drain from the main drainage system
D)the grating provided over gully traps is 23 cm square

Accepted Answer

The answer of Pick up the correct statement from the...

Question 20

Pick up the correct statement from the following:
A)bricks are paid per thousand
B)cement is paid per 50 kg bag
C)lime is paid per quintal
D)all the above

Accepted Answer

All the statements are correct as they reflect common practices in the construction industry for purchasing these materials. Bricks are often sold per thousand, cement is commonly sold in 50 kg bags, and lime is frequently sold per quintal (100 kg).

Quiz 2: Mecasurement and Estimation in Construction Work

Pick up the excavation where measurements are made in square metres for payment.

As per Indian Standard Specifications, the peak discharge for domestic purposes per capita per minute, is taken

In long and short wall method of estimation, the length of long wall is the centre to centre distance between the walls and

The expected out turn of cement concrete 1 : 2 : 4 per mason per day is

The value of 'C' of Indian type W.C. shown in the given figure is:

The area is measured correct to the nearest

The measurement is not made in square metres in case of

The value of 'A' of Indian type W.C. shown in the given figure is:

The trap which is provided to disconnect the house drain from the street sewer is called

Due to change in price level, a revised estimate is prepared if the sanctioned estimate exceeds

The cost of the earthwork in excavation for the surface drain of cross-section shown in the given figure for a total length of 5 metres @ Rs. 450% cum, is

The expected out turn of 2.5 cm cement concrete floor per mansion per day

Pick up the correct statement from the following:

While preparing a detailed estimate

The item of the brick structure measured in sq.m, is

The most reliable estimate is

According to ISI method of measurement, the order of the sequence is

Anti-siphonage pipe is connected to

Pick up the correct statement from the following:

Pick up the correct statement from the following: