Figure 4-20 Quasi-Tech Corporation produces specially machined parts. The parts are produced in batches in one continuous manufacturing process. Each part is custom produced and requires special engineering design activity (based on customer specifications). Once the design is completed, the equipment can be set up for batch production. Once the batch is completed, a sample is taken and inspected to see if the parts are within the tolerances allowed. Thus, the manufacturing process has four activities: engineering, setups, machining, and inspecting. Costs have been assigned to each activity using direct tracing and resource drivers:
Owens produces two models: Model X and Model Y. The following table shows how the two products consume activity.
Refer to Figure 4-20. Using the activity ratios for engineering and machining, what is the overhead cost assigned to the engineering pool? (round to two decimal places)
A) $1,880,000
B) $2,620,000
C) $2,740,000
D) $2,870,000

Question

Figure 4-20 Quasi-Tech Corporation produces specially machined parts. The parts are produced in batches in one continuous manufacturing process. Each part is custom produced and requires special engineering design activity (based on customer specifications). Once the design is completed, the equipment can be set up for batch production. Once the batch is completed, a sample is taken and inspected to see if the parts are within the tolerances allowed. Thus, the manufacturing process has four activities: engineering, setups, machining, and inspecting. Costs have been assigned to each activity using direct tracing and resource drivers:
 Owens produces two models: Model X and Model Y. The following table shows how the two products consume activity.
 Refer to Figure 4-20. Using the activity ratios for engineering and machining, what is the overhead cost assigned to the engineering pool? (round to two decimal places)
A) $1,880,000 
B) $2,620,000 
C) $2,740,000 
D) $2,870,000

Quizplus · Accepted Answer

The Answer of Figure 4-20 Quasi-Tech Corporation produces specially machined parts. The parts are produced in batches in one continuous manufacturing process. Each part is custom produced and requires special engineering design activity (based on customer specifications). Once the design is completed, the equipment can be set up for batch production. Once the batch is completed, a sample is taken and inspected to see if the parts are within the tolerances allowed. Thus, the manufacturing process has four activities: engineering, setups, machining, and inspecting. Costs have been assigned to each activity using direct tracing and resource drivers:
 Owens produces two models: Model X and Model Y. The following table shows how the two products consume activity.
 Refer to Figure 4-20. Using the activity ratios for engineering and machining, what is the overhead cost assigned to the engineering pool? (round to two decimal places)
A) $1,880,000 
B) $2,620,000 
C) $2,740,000 
D) $2,870,000

Figure 4-20 Quasi-Tech Corporation Produces Specially Machined Parts