Question 1

MATCHING
Match each item with a statement below:
a.PCIe
f.switch
b.FireWire
g.cut-through mode
c.CardBus
h.store-and-forward mode
d.repeater
i.loopback adapter
e.bridge
-Plugs into a port and crosses over the transmit line to the receive line so that outgoing signals can be redirected into the computer for testing.

Accepted Answer

The answer of MATCHING
Match each item with a statement below:
a.PCIe
f.switch
b.FireWire
g.cut-through...

Question 2

MATCHING
Match each item with a statement below:
a.PCIe
f.switch
b.FireWire
g.cut-through mode
c.CardBus
h.store-and-forward mode
d.repeater
i.loopback adapter
e.bridge
-Supports up to 16 lanes.

Accepted Answer

The answer of MATCHING
Match each item with a statement below:
a.PCIe
f.switch
b.FireWire
g.cut-through...

Question 3

MATCHING
Match each item with a statement below:
a.PCIe
f.switch
b.FireWire
g.cut-through mode
c.CardBus
h.store-and-forward mode
d.repeater
i.loopback adapter
e.bridge
-A switch running in this mode reads the entire data frame into its memory and checks it for accuracy before transmitting the information.

Accepted Answer

The answer of MATCHING
Match each item with a statement below:
a.PCIe
f.switch
b.FireWire
g.cut-through...

Question 4

MATCHING
Match each item with a statement below:
a.PCIe
f.switch
b.FireWire
g.cut-through mode
c.CardBus
h.store-and-forward mode
d.repeater
i.loopback adapter
e.bridge
-Devices that connect two network segments by analyzing incoming frames and making decisions about where to direct them based on each frame's MAC address.

Accepted Answer

The answer of MATCHING
Match each item with a statement below:
a.PCIe
f.switch
b.FireWire
g.cut-through...

Question 5

____ are combinations of networking hardware and software that connect two dissimilar kinds of networks.

Accepted Answer

Routers connect similar kinds of networks, switches connect devices within a network, and broadcast domains refer to the extent of a network's broadcast transmission. Gateways, however, are specifically designed to connect two dissimilar kinds of networks, allowing them to communicate and share data.

Question 6

A(n)____________________ is software that enables an attached device to communicate with the computer's operating system.

Accepted Answer

The answer of A(n)____________________ is software that enables an attached...

Question 7

A computer's ____________________ is the circuit,or signaling pathway,used by the motherboard to transmit data to the computer's components,including its memory,processor,hard disk,and NIC.

Accepted Answer

The answer of A computer's ____________________ is the circuit,or signaling...

Question 8

MATCHING
Match each item with a statement below:
a.PCIe
f.switch
b.FireWire
g.cut-through mode
c.CardBus
h.store-and-forward mode
d.repeater
i.loopback adapter
e.bridge
-Connectivity device that subdivides a network into smaller logical pieces.

Accepted Answer

The answer of MATCHING
Match each item with a statement below:
a.PCIe
f.switch
b.FireWire
g.cut-through...

Question 9

MATCHING
Match each item with a statement below:
a.PCIe
f.switch
b.FireWire
g.cut-through mode
c.CardBus
h.store-and-forward mode
d.repeater
i.loopback adapter
e.bridge
-Uses the IEEE 1394 standard.

Accepted Answer

The answer of MATCHING
Match each item with a statement below:
a.PCIe
f.switch
b.FireWire
g.cut-through...

Question 10

A(n)____________________ NIC is integrated into the motherboard.

Accepted Answer

The answer of A(n)____________________ NIC is integrated into the motherboard....

Question 11

A ____ is a multiport connectivity device that directs data between nodes on a network.

Accepted Answer

The answer of A ____ is a multiport connectivity device...

Question 12

Switches can create ____ by grouping a number of ports into a broadcast domain.

Accepted Answer

Switches create VLANs by grouping a number of ports into a broadcast domain, allowing for better network traffic management and security segmentation. Trunks are used to carry traffic between switches, spanning trees prevent loops in the network, and gateways connect different networks together. However, neither of these options refers to the grouping of ports into a broadcast domain, which is the definition of a VLAN.

Question 13

MATCHING
Match each item with a statement below:
a.PCIe
f.switch
b.FireWire
g.cut-through mode
c.CardBus
h.store-and-forward mode
d.repeater
i.loopback adapter
e.bridge
-A switch running in this mode reads a frame's header and decides where to forward the data before it receives the entire packet.

Accepted Answer

The answer of MATCHING
Match each item with a statement below:
a.PCIe
f.switch
b.FireWire
g.cut-through...

Question 14

Switches that operate anywhere between Layer 4 and Layer 7 are also known as ____ switches.

Accepted Answer

Switches that operate between Layer 4 and Layer 7 are known as content switches. These switches are also called application switches or Layer 7 switches because they can look at the application-level data in network traffic. They can make forwarding decisions based on factors such as server availability, server load, or specific content requests.

Question 15

The ____________________ indicates,in hexadecimal notation,the area of memory that the NIC and CPU use for exchanging,or buffering,data.

Accepted Answer

The answer of The ____________________ indicates,in hexadecimal notation,the area of...

Question 16

____ routing is a technique in which a network administrator programs a router to use specific paths between nodes.

Accepted Answer

Static routing is a technique in which a network administrator programs a router in advance to use specific paths between nodes. This can be useful in situations where the network topology is not expected to change frequently, as it is more simple to configure and does not require constant updates.

Question 17

MATCHING
Match each item with a statement below:
a.PCIe
f.switch
b.FireWire
g.cut-through mode
c.CardBus
h.store-and-forward mode
d.repeater
i.loopback adapter
e.bridge
-External peripheral device specifying 32-bit interface running at 33 MHz.

Accepted Answer

The answer of MATCHING
Match each item with a statement below:
a.PCIe
f.switch
b.FireWire
g.cut-through...

Question 18

To eliminate the possibility of a broadcast storm,switches and bridges implement the ____.

Accepted Answer

To eliminate the possibility of a broadcast storm, switches and bridges implement the Spanning Tree Protocol (STP). STP ensures that there are no loops in the network topology by blocking redundant links and allowing only one active path between any two network devices. This prevents packets from endlessly circulating and causing a broadcast storm. RIP, BGP, and OSPF are all routing protocols used to determine paths for data to travel between networks, and do not directly address the issue of broadcast storms.

Question 19

MATCHING
Match each item with a statement below:
a.PCIe
f.switch
b.FireWire
g.cut-through mode
c.CardBus
h.store-and-forward mode
d.repeater
i.loopback adapter
e.bridge
-Have no means to interpret the data they retransmit.

Accepted Answer

The answer of MATCHING
Match each item with a statement below:
a.PCIe
f.switch
b.FireWire
g.cut-through...

Question 20

A router that directs data between nodes on an autonomous LAN (or one owned and operated by a single organization)is known as a(n)____________________ router.

Accepted Answer

The answer of A router that directs data between nodes...

Quiz 6: Network Hardware

MATCHING Match each item with a statement below: a.PCIe f.switch b.FireWire g.cut-through mode c.CardBus h.store-and-forward mode d.repeater i.loopback adapter e.bridge -Supports up to 16 lanes.

____ are combinations of networking hardware and software that connect two dissimilar kinds of networks.

A(n)____________________ is software that enables an attached device to communicate with the computer's operating system.

A computer's ____________________ is the circuit,or signaling pathway,used by the motherboard to transmit data to the computer's components,including its memory,processor,hard disk,and NIC.

MATCHING Match each item with a statement below: a.PCIe f.switch b.FireWire g.cut-through mode c.CardBus h.store-and-forward mode d.repeater i.loopback adapter e.bridge -Connectivity device that subdivides a network into smaller logical pieces.

MATCHING Match each item with a statement below: a.PCIe f.switch b.FireWire g.cut-through mode c.CardBus h.store-and-forward mode d.repeater i.loopback adapter e.bridge -Uses the IEEE 1394 standard.

A(n)____________________ NIC is integrated into the motherboard.

A ____ is a multiport connectivity device that directs data between nodes on a network.

Switches can create ____ by grouping a number of ports into a broadcast domain.

MATCHING Match each item with a statement below: a.PCIe f.switch b.FireWire g.cut-through mode c.CardBus h.store-and-forward mode d.repeater i.loopback adapter e.bridge -A switch running in this mode reads a frame's header and decides where to forward the data before it receives the entire packet.

Switches that operate anywhere between Layer 4 and Layer 7 are also known as ____ switches.

The ____________________ indicates,in hexadecimal notation,the area of memory that the NIC and CPU use for exchanging,or buffering,data.

____ routing is a technique in which a network administrator programs a router to use specific paths between nodes.

MATCHING Match each item with a statement below: a.PCIe f.switch b.FireWire g.cut-through mode c.CardBus h.store-and-forward mode d.repeater i.loopback adapter e.bridge -External peripheral device specifying 32-bit interface running at 33 MHz.

To eliminate the possibility of a broadcast storm,switches and bridges implement the ____.

MATCHING Match each item with a statement below: a.PCIe f.switch b.FireWire g.cut-through mode c.CardBus h.store-and-forward mode d.repeater i.loopback adapter e.bridge -Have no means to interpret the data they retransmit.

A router that directs data between nodes on an autonomous LAN (or one owned and operated by a single organization)is known as a(n)____________________ router.