Parts manufactured by an injection molding process are subjected to a compressive strength test.We wish to monitor the compressive strength of the parts manufactured by this process using both and s charts.Samples of size 9 are to be taken at regular intervals,and their mean compressive strength (in psi = pounds per square inch)and standard deviation are plotted on the charts in time order.The target values for the compressive strengths are a mean of $\mu$ = 80 psi and a standard deviation of $\sigma$ = 3 psi.The control chart constants are (partially)reproduced below. What is the center line for the s chart? A)0.7 psi B)2.9 psi C)3 psi D)5.1 psi

Question

Quizplus · Accepted Answer

The Answer of Parts manufactured by an injection molding process are subjected to a compressive strength test.We wish to monitor the compressive strength of the parts manufactured by this process using both and s charts.Samples of size 9 are to be taken at regular intervals,and their mean compressive strength (in psi = pounds per square inch)and standard deviation are plotted on the charts in time order.The target values for the compressive strengths are a mean of $\mu$ = 80 psi and a standard deviation of $\sigma$ = 3 psi.The control chart constants are (partially)reproduced below. What is the center line for the s chart? A)0.7 psi B)2.9 psi C)3 psi D)5.1 psi

Parts Manufactured by an Injection Molding Process Are Subjected to a Compressive