Question 1

One advantage of the design/build approach is that usually a firm project cost is established before construction begins.

Accepted Answer

In the design/build approach, the project cost is often not firmly established before construction begins because design and construction phases overlap, allowing for changes and adjustments throughout the process.

Question 2

In the case of design/build, the constructor acts as a general contractor with single-firm control of all subcontractors.

Accepted Answer

In a design/build approach, the constructor (design/build firm) acts as the single point of responsibility, controlling all subcontractors and overseeing both the design and construction phases, effectively serving as the general contractor.

Question 3

In the construction industry of the future, there will likely be a decreased requirement for permits and regulations.

Accepted Answer

The construction industry is expected to see an increase in the requirement for permits and regulations due to growing concerns over safety, environmental sustainability, and urban planning.

Question 4

In the construction management approach, the construction manger usually guarantees the overall price and quality of the work.

Accepted Answer

In the construction management approach, the construction manager acts as an advisor to the owner and does not typically guarantee the overall price and quality of the work; this is more characteristic of a design-build approach.

Question 5

In comparison to other industries, the construction industry is high in assets.

Accepted Answer

The answer of In comparison to other industries, the construction...

Question 6

In a guaranteed maximum price contract, costs above the guarantee are absorbed by the owner.

Accepted Answer

In a guaranteed maximum price (GMP) contract, any costs exceeding the guaranteed maximum price are typically absorbed by the contractor, not the owner.

Question 7

Unlike the high-technology industry, the construction industry does not place much emphasis on R & D.

Accepted Answer

The construction industry traditionally invests a smaller percentage of its revenue into research and development (R&D) compared to the high-technology industry, which is known for its significant investment in R&D to drive innovation and maintain competitive advantage.

Question 8

A structural engineer is responsible for locating a building on a site and identifying the correct setbacks and elevations.

Accepted Answer

The responsibility of locating a building on a site and identifying the correct setbacks and elevations typically falls to architects and civil engineers. Structural engineers focus on the design and analysis of the structural components of a building, ensuring it remains safe and stable.

Question 9

If an owner has only a fixed amount to spend and would not build a project if its cost would exceed this amount, construction management would be the preferred delivery method.

Accepted Answer

Construction management does not guarantee a fixed project cost upfront; it provides flexibility and expertise in managing the project, but the final cost can vary based on actual expenses. A design-build or a lump-sum contract might be more suitable for a fixed budget scenario.

Question 10

One advantage of a Design/Bid/Build delivery method is known project costs before construction begins.

Accepted Answer

In the Design/Bid/Build delivery method, the project design is completed and the total cost is known before the construction phase begins, allowing for a clear understanding of the project costs upfront.

Question 11

Which category of construction is the largest?
A) Residential
B) Building construction
C) Industrial
D) Heavy construction

Accepted Answer

Residential construction is the largest category, as it includes the building and selling of both individual and multi-family dwellings, making up a significant portion of the construction industry.

Question 12

Which category of construction is typically financed by the public sector?
A) Residential
B) Building construction
C) Industrial
D) Heavy construction

Accepted Answer

Heavy construction projects, such as highways, bridges, and dams, are typically financed by the public sector due to their large scale, high cost, and public utility. These projects often require significant investment and coordination from government entities to serve the public interest.

Question 13

Which category of construction would typically be contracted out as design/build?
A) Residential
B) Building construction
C) Industrial
D) Heavy construction

Accepted Answer

Industrial construction projects often use the design/build approach to streamline processes and integrate design and construction phases for efficiency.

Question 14

Dams, highways, and bridges would be classified as what type of project?
A) Residential
B) Building construction
C) Industrial
D) Heavy construction

Accepted Answer

Dams, highways, and bridges are examples of heavy construction projects because they involve large-scale structures that are typically part of infrastructure development, requiring specialized skills and equipment.

Question 15

Which category of construction is characterized by many small companies and great instability during economic recessions?
A) Residential
B) Building construction
C) Industrial
D) Heavy construction

Accepted Answer

Residential construction is characterized by many small companies, and it tends to experience great instability during economic recessions as demand for new homes and renovations can significantly decrease.

Question 16

Which of the following characteristics should an owner investigate when choosing a construction manager?
A) Financial health of the company
B) Makeup of the team assigned to the job
C) Experience with similar projects
D) Fee structure
E) All of the above

Accepted Answer

All the listed characteristics are important for an owner to investigate when choosing a construction manager. Financial health ensures the company can manage the project effectively; the team's makeup is crucial for project success; experience with similar projects indicates capability; and understanding the fee structure is essential for budgeting.

Question 17

Drawings and specifications are the output of what stage of a project?
A) Concept and feasibility
B) Procurement
C) Engineering and design
D) Startup and implementation
E) None of the above

Accepted Answer

Drawings and specifications are typically produced during the Engineering and Design stage of a project. This stage involves detailed planning and design work, which is documented through drawings and specifications for construction or implementation.

Question 18

Traditionally, concept and feasibility studies are handled by the????
A) Owner
B) Architect
C) Contractor
D) Subcontractor

Accepted Answer

The owner typically handles concept and feasibility studies to determine the viability and scope of a project before engaging architects or contractors.

Question 19

Site selection and financing would usually be the responsibility of the????
A) Owner
B) Architect
C) Contractor
D) Subcontractor

Accepted Answer

Site selection and financing are typically the responsibilities of the owner, as they are the party that initiates the project, secures the necessary funds, and decides on the location.

Question 20

Which of the following would not be included in a typical site investigation?
A) Size of the site
B) Availability of local labor
C) Soils classification
D) Ledge outcropping
E) Existing structures

Accepted Answer

Availability of local labor is typically not included in a site investigation as such investigations focus on the physical and environmental conditions of the site itself, such as its size, soil classification, geological features like ledge outcroppings, and any existing structures on the site. Local labor availability is more related to the project management and planning aspects rather than the physical site characteristics.

Quiz 15: Key Concepts in Construction Management and Delivery Methods

One advantage of the design/build approach is that usually a firm project cost is established before construction begins.

In the case of design/build, the constructor acts as a general contractor with single-firm control of all subcontractors.

In the construction industry of the future, there will likely be a decreased requirement for permits and regulations.

In the construction management approach, the construction manger usually guarantees the overall price and quality of the work.

In comparison to other industries, the construction industry is high in assets.

In a guaranteed maximum price contract, costs above the guarantee are absorbed by the owner.

Unlike the high-technology industry, the construction industry does not place much emphasis on R & D.

A structural engineer is responsible for locating a building on a site and identifying the correct setbacks and elevations.

If an owner has only a fixed amount to spend and would not build a project if its cost would exceed this amount, construction management would be the preferred delivery method.

One advantage of a Design/Bid/Build delivery method is known project costs before construction begins.

Which category of construction is the largest?

Which category of construction is typically financed by the public sector?

Which category of construction would typically be contracted out as design/build?

Dams, highways, and bridges would be classified as what type of project?

Which category of construction is characterized by many small companies and great instability during economic recessions?

Which of the following characteristics should an owner investigate when choosing a construction manager?

Drawings and specifications are the output of what stage of a project?

Traditionally, concept and feasibility studies are handled by the????

Site selection and financing would usually be the responsibility of the????

Which of the following would not be included in a typical site investigation?