Question 1

A ____ typically consists of a large glass sheet, frame assembly, and motor assembly for sliding the glass back into the rear of the roof panel.

Accepted Answer

A sunroof assembly typically includes a large glass sheet, frame assembly, and motor assembly for sliding the glass back into the rear of the roof panel, allowing light and air into a vehicle.

Question 2

Which of the following statements is LEAST-Likely true?

Accepted Answer

Tailgate glass is typically not secured to a regulator with adhesives. Instead, it is more common for the glass to be mechanically fastened or attached using clips or brackets, ensuring a secure and adjustable connection that can withstand the movement and vibrations of normal vehicle operation. Adhesives are less likely to be used in this context due to the need for durability and the potential need for adjustments or repairs.

Question 3

List three methods used to attach the door glass to the window lifting or regulator mechanism.

Accepted Answer

The answer of List three methods used to attach the...

Question 4

______________________________ consists of two thin sheets of glass with a thin layer of clear plastic between them.

Accepted Answer

The answer of ______________________________ consists of two thin sheets of...

Question 5

How would you perform a door weatherstrip service?

Accepted Answer

The answer of How would you perform a door weatherstrip...

Question 6

List four causes of exterior door handle problems.

Accepted Answer

The answer of List four causes of exterior door handle...

Question 7

______________________________ indicate panel misalignment from structural damage, shifted panel fasteners, or
worn mechanical parts (hinges or latches).

Accepted Answer

The answer of ______________________________ indicate panel misalignment from structural damage,...

Question 8

Which of the following statements is LEAST-Likely true?

Accepted Answer

Compact wagons typically do not have a three-way tailgate; this feature is more common in larger vehicles like SUVs.

Question 9

A ____ involves trying to move the door assembly up and down on its hinges.

Accepted Answer

A door hinge check involves trying to move the door assembly up and down on its hinges to assess the condition of the door hinges.

Question 10

A(n) _________________________ is often needed to reach under the trim panel to release the plastic clips.

Accepted Answer

The answer of A(n) _________________________ is often needed to reach...

Question 11

All of the following are components of a window regulator EXCEPT:

Accepted Answer

The answer of All of the following are components of...

Question 12

Why do you think vehicle manufacturers use weld-bond adhesives?

Accepted Answer

The answer of Why do you think vehicle manufacturers use...

Question 13

When the doors on a sedan need adjusting, start at the ________ door

Accepted Answer

The answer of When the doors on a sedan need...

Question 14

While having a discussion, Technician A says that the use of oil on rubber or felt window channels is highly recommended.Technician B says oil can cause the rubber or felt to swell and deteriorate.Who is correct?

Accepted Answer

Oil can cause rubber or felt materials to swell and deteriorate over time, making Technician B correct.

Question 15

A(n) ____ is a thick, heavy, steel plate with threaded holes to accept large bolts.

Accepted Answer

A caged plate is a thick, heavy steel plate designed with threaded holes to accommodate large bolts, often used in construction and machinery for strong, secure connections.

Question 16

The part that will MOST-Likely be housed in a "cage," or box of thin sheet metal spot welded to the body panel is:

Accepted Answer

The threaded plate is most likely to be housed in a "cage" or box of thin sheet metal spot welded to the body panel. This design allows for secure attachment points for various components and can be easily integrated into the vehicle's structure.

Question 17

_________________________ results when the rear of the door is lower than the front.

Accepted Answer

The answer of _________________________ results when the rear of the...

Question 18

How would you remove a door lock mechanism?

Accepted Answer

The answer of How would you remove a door lock...

Question 19

The part that MOST-Likely belongs to a sunroof design is:

Accepted Answer

The drain plate is a part of the sunroof design, used to collect and drain away water that gets past the sunroof's seals, preventing water from entering the car's interior.

Quiz 10: Door, Roof, and Moveable Glass Service

A ____ typically consists of a large glass sheet, frame assembly, and motor assembly for sliding the glass back into the rear of the roof panel.

Which of the following statements is LEAST-Likely true?

List three methods used to attach the door glass to the window lifting or regulator mechanism.

______________________________ consists of two thin sheets of glass with a thin layer of clear plastic between them.

How would you perform a door weatherstrip service?

List four causes of exterior door handle problems.

______________________________ indicate panel misalignment from structural damage, shifted panel fasteners, or worn mechanical parts (hinges or latches).

Which of the following statements is LEAST-Likely true?

A ____ involves trying to move the door assembly up and down on its hinges.

A(n) _________________________ is often needed to reach under the trim panel to release the plastic clips.

All of the following are components of a window regulator EXCEPT:

Why do you think vehicle manufacturers use weld-bond adhesives?

When the doors on a sedan need adjusting, start at the ________ door

While having a discussion, Technician A says that the use of oil on rubber or felt window channels is highly recommended.Technician B says oil can cause the rubber or felt to swell and deteriorate.Who is correct?

A(n) ____ is a thick, heavy, steel plate with threaded holes to accept large bolts.

The part that will MOST-Likely be housed in a "cage," or box of thin sheet metal spot welded to the body panel is:

_________________________ results when the rear of the door is lower than the front.

How would you remove a door lock mechanism?

The part that MOST-Likely belongs to a sunroof design is: