Undercut shall not exceed the lesser of ______% of the base metal thickness or ____________.
A) 10%, 1/32 in.(0.8 mm)
B) 5%, 1/16 in.(1.6 mm)
C) 8%, 3/64 in.(1.2 mm)
D) 3%, 1/64 in.(0.4 mm)
Correct Answer:
Verified
Q4: The maximum diameter of any single porosity
Q9: For a visual inspection of a pipe
Q14: The maximum reinforcement of the cover pass
Q19: For a visual inspection of a pipe
Q21: What determines the size, number, and location
Q27: It is important that tack welds be
Q28: When using the spray metal transfer method,
Q29: Although the welded pipe seam is _,
Q35: As the 1G weld passes over the
Q40: What should the gun angle and travel
Unlock this Answer For Free Now!
View this answer and more for free by performing one of the following actions
Scan the QR code to install the App and get 2 free unlocks
Unlock quizzes for free by uploading documents