As the 1G weld passes over the top of the pipe and starts downhill, change to a slight ________ angle that will increase to approximately a _______ angle.

Question

​As the 1G weld passes over the top of the pipe and starts downhill, change to a slight ________ angle that will increase to approximately a _______ angle.

Quizplus · Accepted Answer

When welding downhill, it is recommended to use the backhand technique, which involves holding the electrode at an angle of approximately 45 degrees to the direction of travel. This helps to maintain proper penetration and prevent undercutting.

​As the 1G Weld Passes Over the Top of the Pipe

As the 1G Weld Passes Over the Top of the Pipe