Question 1

The _____ is the part of the pipes that are closest together where it will be welded. ​
A)joint root ​
B)bevel angle​
C)scope​
D)joint geometry​

Accepted Answer

D

Question 2

The _____ is often a smaller pipe that feeds into a larger pipe known as a header. ​
A)saddle​
B)branch​
C)tee​
D)setback​

Accepted Answer

The branch is the term used for a smaller pipe that feeds into a larger pipe, known as a header. This configuration is common in plumbing and piping systems where multiple sources converge into a main line.

Question 3

Plasma equipment has the advantage of being a ____ cutting process that can cut a variety of metals. ​

Accepted Answer

high-speed

Question 4

Joint geometry has two elements to it - shape and _____. ​
A)dimensions ​
B)groove ​
C)angle ​
D)face​

Accepted Answer

Joint geometry involves both the shape of the joint and its dimensions. The dimensions are crucial for determining the size and fit of the parts being joined.

Question 5

Name the five pipe layout tools.​

Accepted Answer

The answer of Name the five pipe layout tools.​...

Question 6

What can you do if a pipe-beveling machine is not available to flame-cut a bevel end on a pipe?

Accepted Answer

The answer of What can you do if a pipe-beveling...

Question 7

Metal rings can be used to lay out saddles, 45-degree and 90-degree elbows, and _____. ​
A)radius markers ​
B)templates ​
C)square cuts ​
D)grinding​

Accepted Answer

Metal rings can be used to lay out square cuts, as they help in marking and ensuring accurate cuts on pipes or other cylindrical objects.

Question 8

The most commonly used process to prepare pipe for welding is the _____ torch process. ​
A)ionized​
B)oxy-fuel​
C)plasma​
D)manual​

Accepted Answer

The oxy-fuel process is the most commonly used method to prepare pipe for welding because it efficiently cuts and bevels the pipe, preparing it for a clean weld.

Question 9

When laying out pipe for 90-degree saddles, there are _____ techniques that can be used. ​
A)two​
B)three​
C)four​
D)five​

Accepted Answer

There are two primary techniques used for laying out pipe for 90-degree saddles: the triangulation method and the concentric method. These are the most commonly taught and used methods in pipefitting and fabrication.

Question 10

There are two common types of weld joints used in most pipe-welding applications - groove welds and _____ welds. ​

Accepted Answer

The answer of There are two common types of weld...

Question 11

_____ is the shape and dimensions of a joint as viewed in cross section prior to welding. ​
A)Joint root​
B)Bevel angle​
C)Scope​
D)Joint geometry ​

Accepted Answer

Joint geometry refers to the shape and dimensions of a joint as viewed in cross section prior to welding, including aspects such as the width, depth, and angle of the joint.

Question 12

What is the disadvantage of using plasma equipment? ​

Accepted Answer

The answer of What is the disadvantage of using plasma...

Question 13

What are the main considerations for constructing an orange peel? ​

Accepted Answer

The answer of What are the main considerations for constructing...

Question 14

Which of the following tools has the ability to conform to any angle so that both pieces of pipe or tubing can be marked accurately? ​
A)template​
B)contour radius marker ​
C)metal rings​
D)contour tool​

Accepted Answer

A contour tool is specifically designed to conform to various shapes and angles, allowing for accurate marking on both pieces of pipe or tubing.

Question 15

On many machine torches the cutting tip is positioned very close to the _____. ​

Accepted Answer

The answer of On many machine torches the cutting tip...

Question 16

Why don't high-strength, high-reliability, extremely critical piping systems use welder-fabricated fittings? ​

Accepted Answer

The answer of Why don't high-strength, high-reliability, extremely critical piping...

Question 17

The _____ technique is when the end of a pipe is cut, formed, and welded to cap off the end. ​
A)pipe end​
B)lateral​
C)orange peel​
D)banana peel​

Accepted Answer

The "orange peel" technique involves cutting, forming, and welding the end of a pipe to cap it off, resembling the appearance of an orange peel.

Question 18

A pipe's _____ will dictate the quality and which code will apply. ​

Accepted Answer

The answer of A pipe's _____ will dictate the quality...

Question 19

Which of the following is the best way to flame-cut a bevel end on a pipe? ​
A)pipe-beveling machine torch ​
B)hand grinder ​
C)freehand​
D)half-round file ​

Accepted Answer

A pipe-beveling machine torch is specifically designed for cutting bevels on pipes, ensuring precision and efficiency, unlike the other methods listed.

Question 20

Groove _____ is the surface of the members that are included in the groove. ​

Accepted Answer

The answer of Groove _____ is the surface of the...

Quiz 6: Pipe Joint Design and Preparation

The _____ is the part of the pipes that are closest together where it will be welded. ​

The _____ is often a smaller pipe that feeds into a larger pipe known as a header. ​

Plasma equipment has the advantage of being a ____ cutting process that can cut a variety of metals. ​

Joint geometry has two elements to it - shape and _____. ​

Name the five pipe layout tools.​

What can you do if a pipe-beveling machine is not available to flame-cut a bevel end on a pipe?

Metal rings can be used to lay out saddles, 45-degree and 90-degree elbows, and _____. ​

The most commonly used process to prepare pipe for welding is the _____ torch process. ​

When laying out pipe for 90-degree saddles, there are _____ techniques that can be used. ​

There are two common types of weld joints used in most pipe-welding applications - groove welds and _____ welds. ​

_____ is the shape and dimensions of a joint as viewed in cross section prior to welding. ​

What is the disadvantage of using plasma equipment? ​

What are the main considerations for constructing an orange peel? ​

Which of the following tools has the ability to conform to any angle so that both pieces of pipe or tubing can be marked accurately? ​

On many machine torches the cutting tip is positioned very close to the _____. ​

Why don't high-strength, high-reliability, extremely critical piping systems use welder-fabricated fittings? ​

The _____ technique is when the end of a pipe is cut, formed, and welded to cap off the end. ​

A pipe's _____ will dictate the quality and which code will apply. ​

Which of the following is the best way to flame-cut a bevel end on a pipe? ​

Groove _____ is the surface of the members that are included in the groove. ​

The _____ is the part of the pipes that are closest together where it will be welded.

The _____ is often a smaller pipe that feeds into a larger pipe known as a header.

Plasma equipment has the advantage of being a ____ cutting process that can cut a variety of metals.

Joint geometry has two elements to it - shape and _____.

Name the five pipe layout tools.

Metal rings can be used to lay out saddles, 45-degree and 90-degree elbows, and _____.

The most commonly used process to prepare pipe for welding is the _____ torch process.

When laying out pipe for 90-degree saddles, there are _____ techniques that can be used.

There are two common types of weld joints used in most pipe-welding applications - groove welds and _____ welds.

_____ is the shape and dimensions of a joint as viewed in cross section prior to welding.

What is the disadvantage of using plasma equipment?

What are the main considerations for constructing an orange peel?

Which of the following tools has the ability to conform to any angle so that both pieces of pipe or tubing can be marked accurately?

On many machine torches the cutting tip is positioned very close to the _____.

Why don't high-strength, high-reliability, extremely critical piping systems use welder-fabricated fittings?

The _____ technique is when the end of a pipe is cut, formed, and welded to cap off the end.

A pipe's _____ will dictate the quality and which code will apply.

Which of the following is the best way to flame-cut a bevel end on a pipe?

Groove _____ is the surface of the members that are included in the groove.