Question 1

When applying for a new job, you will most likely be asked to _____. ​

Accepted Answer

take another certification test,

Question 2

How can stress risers at the edge of a weld be prevented? ​

Accepted Answer

To prevent stress risers at the edge of a weld, the face of the weld must have a smooth transition between the weld and the pipe surface. ​

Question 3

What items can be helpful to see the reading on a weld gauge? ​

Accepted Answer

Sometimes a magnifying glass and a flashlight can be helpful to see the reading on a weld gauge. ​

Question 4

The primary purpose of a visual inspection is to identify flaws that might pose a threat to a pipe's _____. ​

Accepted Answer

The answer of The primary purpose of a visual inspection...

Question 5

The AWS _____ program is the test most commonly used by welding schools to certify students. ​
A)SENSE​
B)workmanship​
C)demonstration​
D)coding​

Accepted Answer

The AWS SENSE (Schools Excelling through National Skills Education) program is a comprehensive set of minimum standards and guidelines for welding education programs designed to assist schools in training welders. It is commonly used by welding schools for certification purposes.

Question 6

To become an AWS certified welder, you must pass a welding _____ test at an AWS Accredited Test Facility. ​

Accepted Answer

The answer of To become an AWS certified welder, you...

Question 7

A _____ is an interruption of the typical structure of a material. ​
A)discontinuity​
B)defect​
C)stress riser​
D)groove​

Accepted Answer

A discontinuity is an interruption in the typical structure of a material, which can affect its integrity or performance.

Question 8

What is the major difference between discontinuities and defects? ​

Accepted Answer

The answer of What is the major difference between discontinuities...

Question 9

Who is usually the designated individual who fills out the bottom part of the Welder and Welding Operator Qualification Test Record? ​

Accepted Answer

The answer of Who is usually the designated individual who...

Question 10

AWS welder certifications are good for _____ months. ​
A)3​
B)6​
C)9​
D)12​

Accepted Answer

The answer of AWS welder certifications are good for _____...

Question 11

The most common welding codes used in the piping industry today are published by the API, the AWS, and the _____. ​
A)SENSE​
B)AWP​
C)APW​
D)ASME​

Accepted Answer

The most common welding codes in the piping industry are published by the American Petroleum Institute (API), the American Welding Society (AWS), and the American Society of Mechanical Engineers (ASME).

Question 12

There is a(n)_____ fee for a school to join the SENSE program. ​
A)weekly​
B)monthly​
C)annual​
D)one-time​

Accepted Answer

The answer of There is a(n)_____ fee for a school...

Question 13

Give an example of a stress riser that can cause a failure. ​

Accepted Answer

The answer of Give an example of a stress riser...

Question 14

A stress riser is a point of stress concentration usually caused by an abrupt change in the thickness or _____ of a material or the presence of a sharp groove or crack on the material's surface. ​
A)shape​
B)size​
C)width​
D)height​

Accepted Answer

A stress riser often occurs due to an abrupt change in the shape of a material, which can lead to a concentration of stress in a specific area. This can be due to geometric features such as holes, notches, or changes in cross-sectional area.

Question 15

Because of nearly _____ years of providing excellence in certifying students through the SENSE program, many companies in the welding industry recognize a student's SENSE welding certification as a stamp of approval. ​
A)5​
B)10​
C)20​
D)50​

Accepted Answer

The SENSE (Schools Excelling through National Skills Education) program has been around for nearly 20 years, providing a recognized certification in the welding industry.

Question 16

The basic visual inspection process requires tools to measure the joint _____ before the weld is produced. ​
A)geometry​
B)bend​
C)length​
D)width​

Accepted Answer

The basic visual inspection process requires tools to measure the joint geometry before the weld is produced, as this helps in determining the appropriate welding technique and parameters to be used.

Question 17

A _____ is a discontinuity that by nature or accumulated effect renders a part or product unable to meet minimum acceptable standards or specifications. ​
A)cover pass​
B)defect​
C)stress riser​
D)groove​

Accepted Answer

A defect is a flaw or imperfection in a part or product that makes it unable to meet the required standards or specifications.

Question 18

_____ metals are the ones that are more susceptible to stress riser failure. ​

Accepted Answer

The answer of _____ metals are the ones that are...

Question 19

Stress risers are most detrimental when they are located on the _____. ​
A)groove​
B)notch​
C)weld pass​
D)surface​

Accepted Answer

Stress risers, which are locations where stress concentrations occur, are most detrimental when they are located on the surface of a material. This is because the surface is where cracks are most likely to initiate due to the stress concentration, leading to potential failure of the material.

Question 20

The fabrication workmanship standards require only a _____ inspection. ​

Accepted Answer

The answer of The fabrication workmanship standards require only a...

Quiz 19: Pipe Welding Certification - Welding Procedures

When applying for a new job, you will most likely be asked to _____.

How can stress risers at the edge of a weld be prevented?

What items can be helpful to see the reading on a weld gauge?

The primary purpose of a visual inspection is to identify flaws that might pose a threat to a pipe's _____.

The AWS _____ program is the test most commonly used by welding schools to certify students.

To become an AWS certified welder, you must pass a welding _____ test at an AWS Accredited Test Facility.

A _____ is an interruption of the typical structure of a material.

What is the major difference between discontinuities and defects?

Who is usually the designated individual who fills out the bottom part of the Welder and Welding Operator Qualification Test Record?

AWS welder certifications are good for _____ months.

The most common welding codes used in the piping industry today are published by the API, the AWS, and the _____.

There is a(n) _____ fee for a school to join the SENSE program.

Give an example of a stress riser that can cause a failure.

A stress riser is a point of stress concentration usually caused by an abrupt change in the thickness or _____ of a material or the presence of a sharp groove or crack on the material's surface.

Because of nearly _____ years of providing excellence in certifying students through the SENSE program, many companies in the welding industry recognize a student's SENSE welding certification as a stamp of approval.

The basic visual inspection process requires tools to measure the joint _____ before the weld is produced.

A _____ is a discontinuity that by nature or accumulated effect renders a part or product unable to meet minimum acceptable standards or specifications.

_____ metals are the ones that are more susceptible to stress riser failure.

Stress risers are most detrimental when they are located on the _____.

The fabrication workmanship standards require only a _____ inspection.