Question 1

You are preparing to install a new XtremIO cluster. What software may be required for you to perform the installation?
A) XtremIO storage controller rescue image XtremApp software bundle
B) XtremIO Technician Advisor XMCLI Client
C) XMS rescue image
D) XMS VHD file

Accepted Answer

XtremIO storage controller rescue image and XtremApp software bundle are required for installing a new XtremIO cluster.

Question 2

Where can site planning and other product related documentation be found?
A) SolVe Desktop
B) powerlink.emc.com
C) xtremio.com
D) Procedure Generator

Accepted Answer

The answer of Where can site planning and other product...

Question 3

A storage administrator is installing the VSI RecoverPoint Management plug-in, but the installation fails. What could be causing this?
A) vSphere client not installed
B) vSphere client not running during the installation
C) RPAs used were all virtual
D) At least one virtual RPA present

Accepted Answer

The answer of A storage administrator is installing the VSI...

Question 4

Which EMC storage does RecoverPoint leverage for Snap-based Replication?
A) VNX only
B) VMAX only
C) VPLEX
D) VNX and VMAX

Accepted Answer

The answer of Which EMC storage does RecoverPoint leverage for...

Question 5

Which GUI do you use when choosing a point-in-time image for VMware SRM to use during a failover or failover test?
A) VSphere Client
B) Unisphere for RecoverPoint
C) VSphere Web Client
D) Replication Manager

Accepted Answer

The answer of Which GUI do you use when choosing...

Question 6

A company has a database protected by RecoverPoint that has become corrupted. They want to use the Recover Production wizard to repair the corruption. What action should be taken at the production host prior to starting the recovery?
A) Unmount the production volume(s)
B) Pause replication
C) Disable the Consistency Group
D) Create a bookmark

Accepted Answer

Unmounting the production volume(s) ensures that no I/O operations occur during the recovery process, preventing further data corruption.

Question 7

What is a possible trigger to initiate RecoverPoint Snap-based Replication?
A) High Load condition detected
B) RecoverPoint snapshot takes place
C) INIT snapshot takes place
D) Incoming date marked on Delta Marker stream

Accepted Answer

The answer of What is a possible trigger to initiate...

Question 8

In a dual X-Brick cluster, how many Storage Controllers are directly powered by the rack's PDUs?
A) 0
B) 1
C) 2
D) 4

Accepted Answer

The answer of In a dual X-Brick cluster, how many...

Question 9

EMC installed a 4 X-Brick cluster in a customer's Data Center. How many PDPs need to be connected to an electricity source in order to adequately supply power to all PDUs of this cluster?
A) 2
B) 4
C) 6
D) 8

Accepted Answer

Each X-Brick requires two PDPs to power all of its PDUs.

Question 10

An administrator performs a Consistency Group failover to a remote cluster. What happens to the data stored in the copy journal after the copy journal becomes the production journal?
A) It is deleted.
B) It is replicated to the journal at the production site.
C) It is replicated to the journal volume at the DR site.
D) It remains as accessible snapshots at the DR site.

Accepted Answer

When a Consistency Group failover occurs and the copy journal becomes the production journal, the data stored in the copy journal is typically deleted as it is no longer needed for replication purposes.

Question 11

Where can site planning and other product related documentation be found?
A) support.emc.com
B) powerlink.emc.com
C) xtremio.com
D) Procedure Generator

Accepted Answer

Site planning and other product-related documentation can be found on support.emc.com, which is the official support site for EMC products.

Question 12

A conversion from RecoverPoint/SE to RecoverPoint/EX was just completed. What is the next required step?
A) Remove RecoverPoint/SE license, then add RecoverPoint/EX license
B) Add RecoverPoint/EX license directly, because the newly added license will replace the existing one
C) Run a health check of RecoverPoint/EX
D) Reconfigure the Consistency Groups

Accepted Answer

The next required step is to remove the RecoverPoint/SE license and then add the RecoverPoint/EX license, as the licenses are different and need to be updated accordingly.

Question 13

What is a benefit of integrating RecoverPoint with VMware Site Recovery Manager (SRM)?
A) Enables coordinated failover of virtual machines and their storage
B) Eliminates hardware dependencies when using heterogeneous storage with VMware
C) Enables replication of individual virtual machines without the need to replicate an entire VMFS volume
D) Enables full protection of VMware ESXi servers

Accepted Answer

Integrating RecoverPoint with VMware SRM allows for coordinated failover of virtual machines and their associated storage, ensuring consistency and reducing downtime during disaster recovery scenarios.

Question 14

You have VMware SRM with RecoverPoint protection already configured. What additional software is needed to run an SRM failover using a particular point-in-time image from RecoverPoint?
A) VSI RecoverPoint Management plug-in
B) Replication Manager
C) VSI for VMware vSphere Web Client
D) RecoverPoint SRA

Accepted Answer

VSI RecoverPoint Management plug-in is required to run an SRM failover using a particular point-in-time image from RecoverPoint.

Question 15

The VSI RecoverPoint Management plug-in can protect datastores accessed by the ESXi host using which protocols?
A) Fibre Channel, FCoE, and iSCSI
B) Fibre Channel, FCoE, and NFS
C) FCoE, iSCSI, and CIFS
D) FCoE, iSCSI, and NFS

Accepted Answer

Fibre Channel, FCoE, and iSCSI are the protocols that the VSI RecoverPoint Management plug-in can protect datastores accessed by the ESXi host.

Question 16

An existing environment is replicating using RecoverPoint/CL. A new VPLEX has just been installed and the VPLEX splitter has been added to the RecoverPoint configuration. The administrator can see the VPLEX splitter in Unisphere for RecoverPoint but cannot obtain management, installation, and integration information about volume types. What could cause this issue?
A) RecoverPoint and VPLEX certificates have not been exchanged.
B) The VPLEX certificate has expired.
C) VPLEX splitter is only compatible with RecoverPoint/EX.
D) RPAs have not been added to a Storage View.

Accepted Answer

RecoverPoint and VPLEX certificates have not been exchanged.

Question 17

Where can network and firewall requirements be found?
A) Site Preparation Guide
B) Pre-Installation Checklist
C) Installation Summary Form
D) Hardware Installation and Upgrade Guide

Accepted Answer

The Site Preparation Guide provides information on network and firewall requirements.

Question 18

In a VPLEX splitter environment, where is the splitter process running?
A) VPLEX directors
B) VPLEX FE ports
C) VPLEX BE ports
D) VPLEX volumes

Accepted Answer

The splitter process in a VPLEX environment runs on the VPLEX directors, which are responsible for managing data flow and replication tasks.

Question 19

An Oracle user is currently protecting their virtual application servers with RecoverPoint. All data is stored on two VNX arrays. They will soon be adding Site Recovery Manager (SRM) to their VMware infrastructure. What will be needed to integrate RecoverPoint functionality into their SRM deployment?
A) EMC Storage Replication Adapter (SRA) for RecoverPoint only
B) EMC Virtual Storage Integrator (VSI)
C) EMC Storage Replication Adapters (SRAs) for VNX and RecoverPoint
D) vSphere SRM Plug-in for Unisphere for RecoverPoint

Accepted Answer

The answer of An Oracle user is currently protecting their...

Question 20

A VMware user is currently protecting their virtual application servers with RecoverPoint. All data is stored on two VNX arrays. They will soon be adding Site Recovery Manager (SRM) to their VMware infrastructure. What will be needed to integrate RecoverPoint functionality into their SRM deployment?
A) EMC Storage Replication Adapter (SRA) for RecoverPoint only
B) EMC Virtual Storage Integrator (VSI)
C) EMC Storage Replication Adapters (SRAs) for VNX and RecoverPoint
D) vSphere SRM Plug-in for Unisphere for RecoverPoint

Accepted Answer

The answer of A VMware user is currently protecting their...

Exam 2: XtremIO Solutions Specialist Exam for Implementation Engineers

You are preparing to install a new XtremIO cluster. What software may be required for you to perform the installation?

Where can site planning and other product related documentation be found?

A storage administrator is installing the VSI RecoverPoint Management plug-in, but the installation fails. What could be causing this?

Which EMC storage does RecoverPoint leverage for Snap-based Replication?

Which GUI do you use when choosing a point-in-time image for VMware SRM to use during a failover or failover test?

A company has a database protected by RecoverPoint that has become corrupted. They want to use the Recover Production wizard to repair the corruption. What action should be taken at the production host prior to starting the recovery?

What is a possible trigger to initiate RecoverPoint Snap-based Replication?

In a dual X-Brick cluster, how many Storage Controllers are directly powered by the rack's PDUs?

EMC installed a 4 X-Brick cluster in a customer's Data Center. How many PDPs need to be connected to an electricity source in order to adequately supply power to all PDUs of this cluster?

An administrator performs a Consistency Group failover to a remote cluster. What happens to the data stored in the copy journal after the copy journal becomes the production journal?

Where can site planning and other product related documentation be found?

A conversion from RecoverPoint/SE to RecoverPoint/EX was just completed. What is the next required step?

What is a benefit of integrating RecoverPoint with VMware Site Recovery Manager (SRM) ?

You have VMware SRM with RecoverPoint protection already configured. What additional software is needed to run an SRM failover using a particular point-in-time image from RecoverPoint?

The VSI RecoverPoint Management plug-in can protect datastores accessed by the ESXi host using which protocols?

Where can network and firewall requirements be found?

In a VPLEX splitter environment, where is the splitter process running?

A VMware user is currently protecting their virtual application servers with RecoverPoint. All data is stored on two VNX arrays. They will soon be adding Site Recovery Manager (SRM) to their VMware infrastructure. What will be needed to integrate RecoverPoint functionality into their SRM deployment?