Question 1

Whenever using tools, always think:
A) about the end of the day.
B) safety first.
C) what job is next.
D) about how much they cost.

Accepted Answer

Safety should always be the first priority when using tools.

Question 2

Technician A states that many automotive technicians invest well over $20,000 in their tool sets. Technician B states that automotive technicians should think of their tools as an investment that pays for itself over time. Who is correct?
A) Technician A
B) Technician B
C) Both A and B
D) Neither A nor B

Accepted Answer

Both Technician A and Technician B are correct. Many automotive technicians do invest significant amounts of money in their tool sets, often exceeding $20,000. Additionally, these tools are considered an investment because they enable technicians to perform their jobs effectively, which in turn generates income and pays for the tools over time.

Question 3

Technician A states that you should seek assistance if tools and equipment are too heavy or too awkward to be managed by a single person. Technician B states that there is no need to tag or report faulty tools. Who is correct?
A) Technician A
B) Technician B
C) Both A and B
D) Neither A nor B

Accepted Answer

Technician A is correct because seeking assistance for heavy or awkward tools is a safety measure. Technician B is incorrect because faulty tools should always be tagged and reported to prevent accidents.

Question 4

All of the following are important things to remember when using tools, EXCEPT:
A) Select the correct tool(s) to undertake tasks.
B) Clean tools prior to use if necessary.
C) Return tools to correct storage locations.
D) None of the answers listed

Accepted Answer

The statement "None of the answers listed" implies that all the other options are important to remember when using tools, making D the correct choice as it suggests there are no exceptions.

Question 5

Technician A says that knowing how to use tools correctly creates a safe working environment. Technician B says that a flare nut wrench is used to loosen very tight bolts and nuts. Who is correct?
A) Technician A
B) Technician B
C) Both A and B
D) Neither A nor B

Accepted Answer

Technician A is correct because using tools correctly is essential for safety. Technician B is incorrect because a flare nut wrench is specifically designed for loosening and tightening flare nuts, not necessarily very tight bolts and nuts.

Question 6

All of these power tools are common in a technician's toolbox EXCEPT:
A) Power drill
B) Nail gun
C) Grinder
D) Side cuts

Accepted Answer

The answer of All of these power tools are common...

Question 7

Lockout/tag-out is an umbrella term that describes a set of safety practices and procedures that are intended to reduce the risk of technicians inadvertently using ________ that have been determined to be unsafe or potentially unsafe, or that are in the process of being serviced.
A) Tools
B) Equipment
C) Materials
D) All of the above

Accepted Answer

Lockout/tag-out procedures are intended to reduce the risk of technicians inadvertently using tools, equipment, or materials that have been determined to be unsafe or potentially unsafe, or that are in the process of being serviced.

Question 8

Technician A states that an example of lockout would be physically locking out a tool or piece of equipment so that it can be accessed and used by someone who may be unaware of the potential danger of doing so. Technician B states that an example of a tagout would be affixing a clear and obvious label to a piece of equipment that describes the fault found.
A) Technician A
B) Technician B
C) Both A and B
D) Neither A nor B

Accepted Answer

The answer of Technician A states that an example of...

Question 9

Technician A says that lockout/tag-out is a safety procedure for a safe working environment. Technician B says that lockout is designed to secure a vehicle after all work on it has been completed. Who is correct?
A) Technician A
B) Technician B
C) Both A and B
D) Neither A nor B

Accepted Answer

Lockout/tag-out is a safety procedure used to ensure that dangerous machines are properly shut off and not started up again before the completion of maintenance or repair work. It is not used after work is completed.

Question 10

An example of tag-out would be affixing a clear and obvious label to a piece of equipment that describes all of the following EXCEPT:
A) the fault found.
B) the name of the person who found the fault.
C) the date that the fault was found.
D) the last activity carried out with the equipment.

Accepted Answer

A tag-out label typically includes information about the fault, the person who identified it, and the date it was found, but not the last activity carried out with the equipment.

Question 11

Technician A states that one shouldn't use tools that are potentially unsafe. Technician B states that one shouldn't use tools they have not been trained on. Who is correct?
A) Technician A
B) Technician B
C) Both A and B
D) Neither A nor B

Accepted Answer

Both technicians are correct; using unsafe tools or tools without proper training can lead to accidents or damage.

Question 12

Technicians have a selection of their own tools, which include _________.
A) Various hand tools
B) Electrical meters
C) Both A and B
D) Neither A nor B

Accepted Answer

Technicians typically use a variety of hand tools and electrical meters in their work, so both options A and B are correct.

Question 13

Which of the following are NOT typical tools available for use in the shop?
A) Specialized manufacturer tools
B) High-cost tools
C) Self-training
D) All of the above

Accepted Answer

Self-training is not a tool but rather a method or process for acquiring skills, whereas the other options refer to types of tools.

Question 14

Tools are kept in a toolbox, which is typically kept in the technician's _______.
A) Painting area
B) Material storage area
C) Welding area
D) Work stall

Accepted Answer

A toolbox is typically kept in the technician's work stall where they perform their tasks and need easy access to their tools.

Question 15

All of the following tools are considered portable, EXCEPT:
A) hand tools.
B) scan tool.
C) electrical meters.
D) hoist.

Accepted Answer

A hoist is not considered portable as it is typically a large, stationary piece of equipment used for lifting heavy objects.

Question 16

Technician A states that tools are typically located in each corner of the workshop. Technician B states that tools are usually located in a centralized location. Who is correct?
A) Technician A
B) Technician B
C) Both A and B
D) Neither A nor B

Accepted Answer

Technician B is correct because tools are usually located in a centralized location for easy access and organization in a workshop.

Question 17

Technician A says that certain repair shops will keep specialty tools stored in a central location. Technician B says that shop provided specialty tools should not to be shared between technicians. Who is correct?
A) Technician A
B) Technician B
C) Both A and B
D) Neither A nor B

Accepted Answer

Technician A is correct because it is common for repair shops to store specialty tools in a central location for shared use among technicians. Technician B is incorrect because shop-provided specialty tools are typically meant to be shared to ensure efficiency and cost-effectiveness.

Question 18

Specialized manufacturer tools are shared by everyone in the shop. Technician A says that it is critical that they are inspected for damage. Technician B says that they should be put in their proper storage space after each use. Who is correct?
A) Technician A
B) Technician B
C) Both A and B
D) Neither A nor B

Accepted Answer

Both Technician A and Technician B are correct. It is important to inspect tools for damage to ensure safety and functionality, and proper storage helps maintain their condition and ensures they are available for future use.

Question 19

Technician A states that typically, technicians are required to purchase their own tools. Technician B states that some tools are shared between all the technicians. Who is correct?
A) Technician A
B) Technician B
C) Both A and B
D) Neither A nor B

Accepted Answer

Technician A is correct because it is common practice for technicians to purchase their own personal tools. Technician B is also correct because some larger or specialized tools are often shared among technicians in a workshop.

Question 20

A technician's toolbox usually:
A) shrinks in size over time.
B) expands in size over time.
C) becomes outdated over time.
D) becomes ineffective over time.

Accepted Answer

A technician's toolbox usually expands in size over time as they acquire more tools to handle a wider range of tasks and challenges.

Quiz 3: Basic Tools and Precision Measuring

Whenever using tools, always think:

Technician A states that many automotive technicians invest well over $20,000 in their tool sets. Technician B states that automotive technicians should think of their tools as an investment that pays for itself over time. Who is correct?

Technician A states that you should seek assistance if tools and equipment are too heavy or too awkward to be managed by a single person. Technician B states that there is no need to tag or report faulty tools. Who is correct?

All of the following are important things to remember when using tools, EXCEPT:

Technician A says that knowing how to use tools correctly creates a safe working environment. Technician B says that a flare nut wrench is used to loosen very tight bolts and nuts. Who is correct?

All of these power tools are common in a technician's toolbox EXCEPT:

Lockout/tag-out is an umbrella term that describes a set of safety practices and procedures that are intended to reduce the risk of technicians inadvertently using ________ that have been determined to be unsafe or potentially unsafe, or that are in the process of being serviced.

Technician A says that lockout/tag-out is a safety procedure for a safe working environment. Technician B says that lockout is designed to secure a vehicle after all work on it has been completed. Who is correct?

An example of tag-out would be affixing a clear and obvious label to a piece of equipment that describes all of the following EXCEPT:

Technician A states that one shouldn't use tools that are potentially unsafe. Technician B states that one shouldn't use tools they have not been trained on. Who is correct?

Technicians have a selection of their own tools, which include _________.

Which of the following are NOT typical tools available for use in the shop?

Tools are kept in a toolbox, which is typically kept in the technician's _______.

All of the following tools are considered portable, EXCEPT:

Technician A states that tools are typically located in each corner of the workshop. Technician B states that tools are usually located in a centralized location. Who is correct?

Technician A says that certain repair shops will keep specialty tools stored in a central location. Technician B says that shop provided specialty tools should not to be shared between technicians. Who is correct?

Specialized manufacturer tools are shared by everyone in the shop. Technician A says that it is critical that they are inspected for damage. Technician B says that they should be put in their proper storage space after each use. Who is correct?

Technician A states that typically, technicians are required to purchase their own tools. Technician B states that some tools are shared between all the technicians. Who is correct?

A technician's toolbox usually: